Operation Manual

65
Detailed Settings
Detailed settings for Voices — [VOICE SETTING]
the volume level of Voices in the [HARPSICHORD] and
[PIPE ORGAN] do not change regardless of how you play
the keyboard, the default setting for these Voices is 127.
(See the setting range below.)
Setting range:
0 (softest) – 64 (largest changes in the level) – 127 (loudest and
fixed)
Default setting:
Differs depending on the Voice.
NOTE
“TouchSense” determines the manner and degree to which the
volume level changes in response to your touch on the keyboard.
The MIDI note-on velocity data is not changed; the volume level is
changed for the same velocity data.
Various functions (other than the original one) can be
assigned to the right pedal.
Setting range:
•Sustain
ON/OFF switch type damper
• SustainCont (Sustain Continuously)
Damper that sustains the sound proportionately to how deeply
you press the pedal
•Sostenuto
Sostenuto (page 16)
•Soft
Soft (page 16)
•Expression
A function that lets you create changes in dynamics (volume)
as you play
• PitchBend Up
A function that smoothly raises the pitch
• PitchBend Down
A function that smoothly lowers the pitch
• RotarySpeed
Change the rotational speed of the JazzOrgan rotary speaker
(switch between fast/slow each time you press the pedal)
• VibeRotor
Switch the vibraphone vibrato on/off (switch on/off each time
you press the pedal)
Default setting:
SustainCont
Various functions (other than the original one) can be
assigned to the center pedal.
Setting range:
• Sustain
• Sostenuto
• Soft
• RotarySpeed
•VibeRotor
Default Setting:
Sostenuto
Various functions (other than the original one) can be
assigned to the left pedal.
Setting range:
• Sustain
• Sostenuto
• Soft
• RotarySpeed
•VibeRotor
Default Setting:
Rotary Speed (JazzOrgan and MellowOrgan), Vibraphone
(VibeRotor), Soft (other Voices)
You can assign a function to the pedal connected to the
Clavinova’s AUX PEDAL jack.
Setting the right pedal function
RPedalFunc
TouchSense Set?
_
>
Main(GrndPno ) 64
Store the setting.
Set the value.Select a Voice part.
RPedalFunc Set?
_
>
SustainCont
Store the setting.
Set the value.
Setting the center pedal function
CPedalFunc
Setting the left pedal function
LPedalFunc
Setting the auxiliary pedal function
AuxPedalFunc
CPedalFunc Set?
_
>
Sostenuto
Store the setting.
Set the value.
LPedalFunc Set?
_
>
Soft
Store the setting.
Set the value.
AuxPedalFunc Set?
_
>
Expression
Store the setting.
Set the value.