Operation Manual
71
Detailed Settings
Other settings — [FUNCTION]
This parameter is effective on the Grand Piano Voices.
For details about the Voices to which the string resonance
can be applied, refer to page 75.
Setting range:
Off, 1 – 10
Default setting:
5
This parameter is effective on some of the Grand Piano
Voices. For details about the Grand Piano Voices to which
Sustain Sampling can be applied, refer to page 75.
Setting range:
Off, 1 – 10
Default setting:
5
You can adjust the volume of the key-off sound (the
subtle sound that occurs when you release a key. This is
effective on the Voices in the [GRAND PIANO1 – 3],
[E.PIANO2] and [HARPSICHORD].
For details about the Voices to which the Key-Off
Sampling can be applied, refer to page 75.
Setting range:
Off, 1 – 10
Default setting:
5
This specifies the amount of change that can be produced
by the pitch bend function which smoothly varies the
pitch.
• This setting applies only to the manually-played sound.
• This setting can be made in semitone steps.
• You can set the pedal function (page 65) to determine
whether the pitch will be raised or lowered.
Setting range:
0 – +12 (Pressing the pedal will raise/lower the pitch by 12
semitones [1 octave])
Default setting:
2
NOTE
For some Piano and Harpsichord Voices, the pitch may not be
changed according to the pitch bend setting range here.
This setting lets you switch the speaker on/off.
Setting range:
• Normal (HeadphoneSW)
The speaker will sound only if headphones are not connected.
•On
The speaker will always sound.
•Off
The speaker will not sound.
Default setting:
Normal (HeadphoneSW)
Setting the depth of String Resonance
StringResonanceDepth
Setting the depth of Sustain
Sampling for the damper pedal
SustainSamplingDepth
Specifying the volume of the key-off
sound
KeyOffSamplingDepth
StringResonanceDepth
5
Change the setting.
SustainSamplingDepth
5
Change the setting.
KeyOffSamplingDepth
5
Change the setting.
Setting the range of pitch bend
PitchBendRange
Switching the speaker on/off
Speaker
PitchBendRange
2
Change the setting.
Speaker
Normal (HeadphoneSW)
Change the setting.