Operation Manual

ManualsBrandsYamaha ManualsMusical InstrumentsCLP-525

MIDI Reference

CLP

525

Table of Contents

MIDI Functions.............................................................. 2

MIDI Transmit/Receive Channel Selection.................................2

Local Control ON/OFF................................................................2

Program Change ON/OFF .........................................................3

Control Change ON/OFF............................................................3

MIDI Data Format ......................................................... 4

MIDI Implementation Chart ........................................... 8

Summary of content (8 pages)

PAGE 1
MIDI Reference CLP- 525 Table of Contents MIDI Functions.............................................................. 2 MIDI Transmit/Receive Channel Selection.................................2 Local Control ON/OFF................................................................2 Program Change ON/OFF .........................................................3 Control Change ON/OFF............................................................3 MIDI Data Format ...............................................
PAGE 2
MIDI Functions When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The explanations here cover the settings necessary for performing MIDI communication between both devices. NOTE For instructions on how to connect this instrument to the computer, refer to the “Computer-related Operations” downloadable from the Yamaha website: http://download.yamaha.
PAGE 3
Program Change ON/OFF The information related to Voice changes is called “program change” in MIDI. Sending and receiving program change messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer. (However, the Voice as played from the keyboard is maintained and does not change.
PAGE 4
MIDI Data Format MIDI Channel Message ○ : Can be transmitted and recognized. be transmitted by panel operations, but can be transmitted by song playback data. × : Cannot be transmitted or received. △ : Cannot Status byte 1st Data byte 2nd Data byte MIDI Events Transmitted Status Key Off 8nH Key On 9nH Control Change BnH Mode Message Data (n: channel no.) BnH Parameter Data (HEX) Recognized Parameter kk Key no. (0 – 127) vv Velocity (0 – 127) ○ ○ kk Key no.
PAGE 5
Preset Voice List MSB (0 – 127) LSB (0 – 127) Program Change # (1 – 128) GrandPiano 1 108 0 1 GrandPiano 2 108 3 1 GrandPiano 3 108 2 2 E.Piano 1 108 0 6 E.
PAGE 6
MIDI Parameter Change Table MIDI PARAMETER CHANGE TABLE (SYSTEM) Address (H) 00 00 00 Size (H) Data (H) 4 0000 – 07FF Parameter MASTER TUNE Transmitted Recognized △ ○ Description 01 1st bit 3 – 0  bit 15 – 12 02 2nd bit 3 – 0  bit 11 – 8 03 Default value (H) -102.4 – +102.
PAGE 7
System Exclusive Messages MIDI EVENT Universal System Exclusive MIDI Master Volume Data Format F0H 7FH 7FH 04H ll mm 01H ll mm F7H Transmitted Recognized × ○ × ○ ○ ○ × ○ × ○ Volume (mm = MSB, ll = LSB) or F0H 7FH XN 04H XN ll mm GM System On F0H 01H ll mm F7H When N is received N = 0 – F, whichever is received.
PAGE 8
[ Clavinova ] Model CLP-525 MIDI Implementation Chart Date : 19-DEC-2013 Version : 1.1 MIDI Implementation Chart Function Transmitted Recognized Basic Channel Default Changed 1 - 16 1 - 16   Mode Default Messages Altered 3 3 ************** × × Note Number : True voice 0 - 127 ************** 0 - 127 0 - 127 Velocity Note ON Note OFF     After Touch Key’s Ch’s × × × × × *                 0 - 127 **************    : Song Pos. × : Song Sel.