User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- About the Manuals
- Included Accessories
- Table of Contents
- Panel Controls and Terminals
- CSP – A New World of Piano Performance and Control with Smart Devices –
- Playing the Clavinova as a Piano
- Taking Advantage of the Smart Pianist App
- Functions
- Connections
- [USB TO DEVICE] Terminal
- Connecting audio devices ([AUX IN] jack, AUX OUT [R]/ [L/L+R] jacks)
- Connecting a footswitch/foot controller ([AUX PEDAL] jack)
- Connecting a microphone or guitar ([MIC/LINE IN] jack, [MIC/LINE] switch)
- Connecting to a computer ([USB TO HOST] terminal)
- Connecting external MIDI devices (MIDI terminals)
- Assembly
- Troubleshooting
- Specifications
- Index
CSP-170/CSP-150 Owner’s Manual
30
Functions
You can fine-tune the pitch of the entire instrument in roughly 0.2 Hz steps. This lets you accurately match
the keyboard pitch to that of other instruments or recorded music. The setting range is 414.8 Hz –
466.8 Hz. To raise the pitch, simultaneously hold down the [FUNCTION] button and press the B6 key; to
lower it, simultaneously hold down the [FUNCTION] button and press the A6 key.
To set the pitch to 442.0 Hz (a pitch commonly used by brass and wind instruments), simultaneously hold
down the [FUNCTION] button and press the G#6 key. To restore the default pitch (440.0 Hz),
simultaneously hold down the [FUNCTION] button and press the A#6 key.
Performing this operation resets all data to the factory default settings. To do this, turn off the power once
and simultaneously hold down the C7 (the highest) key and turn on the power.
NOTE
For information about data that is retained even when the power is turned off, refer to page 16.
Fine-tuning the pitch
Initializing the settings
A6C3 B6
Highest key
C3
G#6
A#6
Highest key
Highest key (C7)