User Manual

102
CLP-585/575/545/535/565GP Owner’s Manual
Message List
Some message display remains open. In this case, press the [EXIT] button to close message display.
Message Meaning
Access error The operation has failed. The following causes can be considered. If the following are not responsible, the
file may be damaged.
• The file operation is wrong. Follow the instructions in “Handling Song Files” (page61) or “Backup”/
“Restore” (pages 94 – 95).
• The connected USB flash memory is not compatible with this instrument. For information on compatible
USB flash memory, see page70.
• The protected Song on which you attempted the operation is defective.
Cannot be executed The operation has failed. The following causes can be considered. Solve the causes, and try again.
• The file operation you attempted cannot be executed to Preset Songs or an Audio Song. For information
on the limitation of handling Song files, see page61.
• The Song file operation cannot be made to an empty Song file (page51) or NoSong.
NoSong: This is displayed when you select a folder which does not contain any Songs.
Change to Current Tempo This message indicates that you are applying the current tempo to the selected Song.
Change to Current Voice This message indicates that you are changing the Voice of the Song with the current Voice.
Completed This message indicates that the operation is completed. Go on to the next step.
Completed
Restart now
Restore is completed. The instrument is automatically turned on again.
Convert canceled This message appears when the convert operation is canceled.
Convert completed to USB/
USERFILES/
This message appears when the convert operation to the “USER FILES” folder on a USB flash memory is
completed.
Convert to Audio This message appears during the convert operation.
Copy completed to USB/
USERFILES/
This message appears when the copy operation to the “USER FILES” folder on a USB flash memory is
completed.
Copy completed to User This message appears when the copy operation to the “User” on this instrument is completed.
Device busy The operation, such as converting to the Audio Song or Audio Song playback/recording, has failed. This
message appears when you attempt to use a USB flash memory to which recording/deleting operations are
repeated. Execute the Format operation after making sure there is no important data in the USB flash
memory (page92), and try again.
Device removed This message appears when the USB flash memory is removed from the instrument.
Duplicate name This message indicates that an identically named file already exists. Rename the file (page66).
Executing The instrument is executing the operation. Wait until the message disappears, then go on to the next step.
Factory set executing
Memory Song excluded
The default settings (except the Songs in the “User”) have been restored (page95).
This message also appears if you press and hold down the C7 key and turn on the power to the instrument.
Factory set executing
Memory Song included
The default settings (including the Songs in the “User”) have been restored (page95).
FactorySet Completed
Restart
Factory set is completed. The instrument is then restarted.
Incompatible device This message appears when an incompatible USB flash memory is connected. Use a device whose
compatibility has been confirmed by Yamaha (page70).
Internal hardware error A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.
Last power off invalid
Checking memory
This message appears when the power is turned on after turning off the power while handling a Song file
(page61) or saving a backup file (page94). The internal memory is being checked while this message
appears. If the internal settings are damaged, they will be reset to the default settings. If the Songs in the
“User” are damaged, they will be deleted.
Maximum no. of devices
exceeded
The number of devices exceed the limitation. Up to two USB devices can be connected simultaneously. For
details, see page70.
Memory full Since the capacity and the number of files in the “User”/USB flash memory are full, the operation cannot be
completed. Delete some Songs in the “User”/USB flash memory or move Songs to another USB flash
memory, and try again.
Move completed to USB/
USERFILES/
This message appears when the move operation to the “USER FILES” folder on a USB flash memory is
completed.
Move completed to User This message appears when the move operation to “User” on the instrument is completed.