User Manual

106
CLP-585/575/545/535/565GP Owner’s Manual
Assembling the Clavinova
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in
the correct orientation. Please assemble the unit in accordance
with the sequence given below.
• Assembly should be carried out by at least two persons.
•Be sure to use only the included screws of the specified sizes.
Do not use any other screws. Use of incorrect screws can cause
damage or malfunction of the product.
•Be sure to tighten all screws upon completing assembly of the
unit.
• To disassemble the unit, reverse the assembly sequence given
below.
After completing the assembly, please
check the following.
• Are there any parts left over?
Review the assembly procedure and correct any errors.
• Is the instrument clear of doors and other
movable fixtures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise
when you shake it?
Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
Turn the adjuster so that it is set firmly against the
floor.
• Are the pedal and power cords inserted
securely into the sockets?
Check the connection.
• If the unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.
CAUTION
• When moving the instrument after assembly, always hold the
bottom of the main unit.
• Do not hold the key cover or top portion. Improper handling can
resu lt in damage to the instrument or personal injury.
• If the unit creaks or is otherwise unsteady when you play on the
keyboard, refer to the assembly diagrams and retighten all
screws.
Assembly Precautions
Have a Phillips-head (+) screwdriver of the
appropriate size ready.
Reference page
CLP-585 page 107
CLP-575 page 111
CLP-545 page 114
CLP-535 page 114
CLP-565GP page 117
585 575 545 535 565GP
Do not hold here.
Hold here.
585 575 545 535 565GP
Do not hold
here.
Do not hold here.
Key cover
Top Po s i t i o n