User Manual

15
CLP-585/575/545/535/565GP Owner’s Manual
Getting Started — Playing the Clavinova as a Piano
Lift the cover slightly, then
push and slide it to the end
completely so that both the
panel buttons at the left side
and keyboard are visible. In
this condition, you can make
various panel operations such
as Voice selection and Song
recording/ playback as well as
play the keyboard.
3. Press the [P] (Standby/On) switch at the right end of the
front panel to turn the power on.
The display located at the left end of the front panel and the power indicator
located below the left end of the keyboard both light up.
4. Use the [MASTER VOLUME] slider at the right end of the
front panel to adjust the volume.
While playing the keyboard, adjust the volume level. For details, refer to
“Setting the volume — [MASTER VOLUME]” on page19.
5. After you use the instrument, press the [P] (Standby/On)
switch for a second to turn the power off.
The display and the power indicator are turned off.
585 575 545 535 565GP
Be careful to avoid catching your fingers
when opening or closing the cover.
CAUTION
Tuning
Unlike an acoustic piano, this
instrument does not need to be
tuned by an expert (although
the pitch can be user-adjusted
to match other instruments).
This is because the pitch of
digital instruments is always
maintained perfectly.
[P] (Standby/On) switch
The power indicator
lights up.
CAUTION
Even when the instrument is
turned off, electricity is still
flowing to the instrument at the
minimum level. When you are
not using the instrument for a
long time or during electrical
storms, make sure you unplug
the AC power plug from the wall
AC outlet.
NOTICE
• Any recorded Songs which
are not saved will be lost if the
power automatically turns off.
Make sure to save your data
before this happens.
• Depending on the instrument
status, the power may not
turn off automatically, even
after the specified period of
time elapses. Always turn off
the power manually when the
instrument is not in use.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an
Auto Power Off function that automatically turns the power off if the
instrument is not operated for a specified period of time. The amount of
time that elapses before the power is automatically turned off is
approximately 30 minutes by default; however, you can change the setting
(page93).