User Manual
45
CLP-585/575/545/535/565GP Owner’s Manual
Playing Back Songs
3. In the Repeat display, select a desired item using the [u]/
[d] buttons, then press the [>] button.
If you want to set AB Repeat, select “A – B.”
If you want to set Song Repeat, select “Song.”
4. Set in the setting display.
•AB Repeat .................See below.
•Song Repeat...............See page46.
AB Repeat setting
Specify the repeat range.
4-1. Press the [R/K] button to start Song playback.
4-2. Press the [>] button at the starting point (A) of the range
to be repeated.
4-3. Press the [>] button again at the ending point (B).
After an automatic lead-in (to help guide you into the phrase), the
range from Point A to Point B is played back repeatedly.
5.
To turn off the Repeat function, press the [>] button
while “Repeat Off” is highlighted, or select another Song.
While AB Repeat is on, is shown in the Song display.
MIDI Audio
A – B display
Specifying the top of a
Song as Point A
Specify Point A before starting
playback, then start playback
and specify Point B.
Specifying the end of a
Song as Point B
Specifying only Point A results
in repeat playback between
Point A and the Song end (as
Point B).
NOTE
You can also specify the repeat
range by the following
procedure.
1 Highlight the measure
number using [
u]/[d]
buttons, then fast-forward the
Song to Point A using [<]/[>]
buttons.
2 Highlight “Set A” using [u]/
[
d] buttons, then press the
[>] button.
After specifying Point A, the
display for specifying Point
B is called up.
3 Specify Point B in the same
way as Point A.