User Manual

62
CLP-585/575/545/535/565GP Owner’s Manual
Handling Song Files
Basic Song File Operation
Song files can be handled via the instructions shown below.
1. Connect the USB flash memory to the USB [TO DEVICE]
terminal as necessary.
In order to use a file on a USB flash memory with the instrument, the file
must be stored to the USB flash memory.
2. Select a Song for handling.
For information on selecting a Song, see page 39.
3. Call up the File mode.
3-1. Press the [MENU] button repeatedly to call up the Song Menu
display. Use the [
u]/[d] buttons to select “File” then press the
[>] button.
3-2. Select the desired operation from “Delete,” “Copy,” “Move,”
“MIDItoAudio” or “Rename.”
From here, if you wish to close the File mode, press the [EXIT] button
once or twice.
4. Execute the selected operation.
For specific instructions, refer to the corresponding section.
•
Delete....................................page 63
•
Copy......................................page 63
•
Move .....................................page 64
•
MIDItoAudio .....................page 65
•
Rename ................................page 66
During operation, messages (information, confirmation, etc.) may be
shown on the display. For explanations and details, refer to “Message List”
on page 102.
5. Press the [EXIT] button to close the File mode.
Song Menu display
For example: Renaming files
NOTICE
Do not disconnect the USB
flash memory during file
handling or when a USB flash
memory is mounted. Doing so
may delete all data in the USB
flash memory and the
instrument.