User Manual

Voice Menu
80
CLP-585/575/545/535/565GP Owner’s Manual
Voice Menu
This menu lets you edit or set various parameters about the keyboard performance including as Voice
parameters. By turning on the Dual/Split, you can make the settings for each Voice or each Voice
combination. While playing the keyboard and hearing the sound, change a parameter value to find your
desired sound. Note that you should turn on the Dual/Split before calling up the Voice Menu display.
NOTE
Parameters with * are shown only when Dual/Split is on.
To call up the desired parameter:
Turn on Dual or Split as necessary, select Voices as necessary, press the [MENU] button several times to select “Voice Menu,”
then use the [u]/[d]/[<]/[>] buttons to select the desired parameter.
[>]
[<]
[>]
[<]
[>]
[<]
Description Default setting Setting range
Piano
Setting
VRM
(CLP-585/575)
– Turns the VRM effect on/off. On On, Off
Damper Res.
(CLP-585/575)
(Slider display) Determines the depth of the string resonance effect
which is applied to the PIANO Voices (compatible with
VRM) when the damper pedal (page21) is pressed.
50 – 10
String Res.
(CLP-585/575)
(Slider display) Determines the depth of the string resonance effect
which is applied to the PIANO Voices (compatible with
VRM) when a note on the keyboard is pressed.
50 – 10
String Res.
(CLP-545/535/
565GP)
(Slider display) Determines the depth of the string resonance effect
which is applied to some Voices when a note on the
keyboard is pressed. For Voices to which this effect is
applied, refer to the “Preset Voice List (Detailed)”
(page98).
5 Off, 1 – 10
Key Off Sample (Slider display) Determines the volume of the key-off sound (the subtle
sound that occurs when you release a key) which is
available only for some Voices. For Voices to which this
effect is applied, refer to the Voice List (page96).
5 Off, 1 – 10
Reverb (Setting display) – Determines the Reverb type which is applied to all the
entire sound including the keyboard performance, Song
playback and MIDI data input from an external MIDI
device.
Differs depending
on the Voice or
Voice
combination.
Refer to the
Reverb Type List
(page83)
Chorus (Setting display) – Determines the Chorus type which is applied to all the
entire sound including the keyboard performance, Song
playback and MIDI data input from an external MIDI
device.
Differs depending
on the Voice or
Voice
combination.
Refer to the
Chorus Type List
(page83)
Balance* Volume R2 –
R1*
(Slider display) Adjusts the volume balance between R1 and R2 Voices
when Dual is on.
Differs depending
on the Voice or
Voice
combination.
R2+10 – 0 –
R1+10
Volume L – R* (Slider display) Adjusts the volume balance between the left and right
keyboard sections when Split is on. After adjusting via
the [<]/[>] buttons, press the [EXIT] button to exit from
the Slider display.
Differs depending
on the Voice or
Voice
combination.
L+10 – 0 – R+10
Detune* (Slider display) Detunes the R1 Voice and R2 Voice in Dual mode to
create a thicker sound.
On the display, move the slider rightward via the [>]
button will raise the R1 Voice pitch and lower the R2
Voice pitch, and vice versa.
Differs depending
on the Voice or
Voice
combination.
R2+20 – 0 –
R1+20
Voice Edit (Voice names)* Octave Shifts the pitch of the keyboard up and down in octave
steps. This parameter can be set for each of the R1/R2/L
Voices when Dual/Split is on.
Differs depending
on the Voice or
Voice
combination.
-2 (two octaves
lower) – 0 (no
pitch shift) – +2
(two octaves
higher)