User Manual

System Menu
92
CLP-585/575/545/535/565GP Owner’s Manual
MIDI Initial Setup (Executing
display)
• Cancel
•Send
Transmits the current panel settings such as Voice
selection to a connected MIDI device or computer.
Before you start recording your performance to a
connected MIDI device or computer, execute this
operation to record the current panel settings at the
beginning of your performance data. It causes that the
same panel settings are called up when the recorded
performance is played back.
Operation:
Move the highlight to “Execute,” then press the [>]
button to transmit the panel settings as MIDI messages.
––
Backup Backup Setting For instructions about these functions, refer to pages 94
– 95.
––
Backup
Restore
Factory Set
Utility USB Format Cancel This lets you format or initialize the USB flash memory
connected to the USB [TO DEVICE] terminal.
NOTICE
Executing the Format operation will delete all data saved in
the USB flash memory. Save important data to a computer or
another storage device.
NOTE
When connecting the USB flash memory to the [USB TO
DEVICE] terminal, a message prompting you to execute the
Format operation may appear. If such a case occurs,
execute the Format operation.
Operation
Move the highlight to “Execute,” then press the [>]
button to start the Format operation. After the Format is
completed, a message appears then the instrument
returns to the Utility display after a while.
NOTICE
Never turn off the power or disconnect the USB flash memory
while “Executing” is shown in the display.
––
Execute
USB Properties – Shows the amount of free space and entire memory in
the USB flash memory connected to the USB [TO
DEVICE] terminal.
––
USB Autoload – When this is set to “on,” the Song saved in the root
directory can be selected (shown on the display)
automatically as soon as the USB flash memory is
connected to the USB [TO DEVICE] terminal.
Off On, Off
Speaker (Setting display) Lets you switch the speaker on/off.
• Normal (HeadphoneSW)
The speaker will sound only if headphones are not
connected.
• On
The speaker will always sound.
• Off
The speaker will not sound.
Normal
(HeadphoneSW)
Normal, On, Off
Contrast (Slider display) Adjusts the contrast of the display. 0 -5 – +5
To call up the desired parameter:
Press the [MENU] button several times to select “System Menu,” th en use the [u]/[d]/[<]/[>] bu ttons to select the desired
parameter.
[>]
[<]
[>]
[<]
[>]
[<]
Description Default setting Setting range
Amount of free
space
Amount of entire
memory