User Manual

System Menu
95
CLP-585/575/545/535/565GP Owner’s Manual
This lets you load the backup file (clp-***.bup) saved
via the Backup function (page94) to the instrument
on.
NOTICE
• It may take 1 – 2 minutes to complete this operation. Never turn
off the power during this operation (while “Executing” is shown).
Doing so could result in damage to the data.
• If Protected Songs or recorded Songs reside on “User” memory,
make sure to move the Songs to the USB flash memory by
following the instructions page64 before executing this
operation. If you do not, the Songs will be deleted via this
operation.
1. Connect the USB flash memory containing
the Backup file to the USB [TO DEVICE]
terminal.
2. Press the [MENU] button several times to
select “System Menu.”
3. Use the [u]/[d] buttons to select “Backup,”
use the [>] button to call up the next display,
then use the [
u]/[d] buttons to select
“Restore.”
4. Use the [>] button to call up the next display,
then use the [
u]/[d] button select “Execute.”
5. Press the [>] button to execute the Restore
operation.
A message indicating that the operation is
completed appears, then the instrument will restart
after a while.
This lets you reset this instrument to its factory
default settings which refers to the initial setting
preprogrammed when shipped from the factory, and
is called up when you first turn on the power to this
instrument.
Note that the following points.
• This operation resets the Backup Setting (page94) to the
default setting.
• This operation will not delete the Songs saved in the User
folder.
NOTICE
Never turn off the power during this operation (while “Factory set
executing” is shown). Doing so could result in damage to the data.
1. Press the [MENU] button several times to
select “System Menu.”
2. Use the [u]/[d] buttons to select “Backup,”
use the [>] button to call up the next display,
then use the [
u]/[d] buttons to select
“Factory Set.”
3. Use the [>] button to call up the next display,
then use the [
u]/[d] button select “Execute.”
4. Press the [>] button to execute the Restore
operation.
A message indicating that the operation is
completed appears, then the instrument will restart
after a while.
 Alternate method for restoring the default
settings
Press and hold down the white key on the right end
(C7) and press the [P] (Standby/On) switch to turn
on the power to this instrument. This operation will
not delete the Songs in the User folder.
 Restore
(Restarting the instrument with the Backup file
loaded)
 Factory Set
(Restarting the instrument with the initial
factory settings loaded)
[P] Standby/On switch
C7