User Manual
EN
CLP
-
685, CLP
-
675, CLP
-
645,
CLP
-
635, CLP-665GP
Version 2.00 New Functions
Yamaha has updated the rmware of CLP-685, CLP-675,
CLP-645, CLP-635, CLP-665GP from Version 1.00 to
Version 2.00. is version provides the additional functions
below:
• USB Audio Interface function
• Usage of the smart device app “Smart Pianist”
NOTE
You can check the version number of this instrument via the “System”
menu display: Press the [FUNCTION] button repeatedly to call up the
“System” menu display → “Utility” → “Version.”
USB Audio Interface function
e USB Audio Interface function allows you to transfer
digital audio data to/from a computer or a smart device
(such as a smartphone or tablet) connected to the USB [TO
HOST] terminal via a USB cable. is function provides the
following advantages:
• Playback of audio data with high sound quality
is gives you direct, clear sound in which the sound
quality has less noise and deterioration than that from the
[AUX IN] jack.
• Recording of performances on the instrument as
audio data by using recording or music production
soware
e recorded audio data can be played back on the
computer or smart device.
NOTE
The volume of the audio sound input to the instrument can be
adjusted from the connected computer or smart device.
In addition, you can also set whether the audio sound input
to the instrument is output to a computer or smart device or
not, along with the performance played on the instrument
(Audio Loop Back function).
To output the audio input sound, set Audio Loop Back to
“On.” For example, if you want to record the audio input
sound as well as the sound played on the instrument to a
computer or the smart device, set this to “On.” If you intend
to record only the sound played on the instrument to a
computer or smart device, set this to “O.”
To set this function, press the [FUNCTION] button
repeatedly to call up the “System” menu, then select
“Utility” → “Audio Loop Back.”
• Setting range: On, Off
• Default setting: On
NOTICE
If you are using a DAW (digital audio workstation) application with this
instrument, set Audio Loop Back to off. Otherwise, a loud sound may
occur, depending on the settings of the computer or the application
software.
NOTE
• The Audio Loop Back setting also affects the audio input via the
Bluetooth Audio function or wireless LAN connection.
• The playback sound of an Audio Song on this instrument is also
output to a computer or smart device when this is set to on, while
the sound is not output when this is set to off.
• With Audio Recording on this instrument, the audio input sound
from the connected computer or smart device is recorded when this
is set to on, while the sound is not recorded when this is set to off.
For details on connecting to a computer or smart device,
download the “Computer-related Operations” or “Smart
Device Connection Manual” on the following website.
Yamaha Downloads:
http://download.yamaha.com/
Smart device app “Smart Pianist”
You can now use the smart device app “Smart Pianist”
(available as a free download) with the instrument—
allowing you to select Voices, control the metronome
intuitively with a graphic interface, or display the score on
your smart device, among other functions.
For information about this app, access the following web
page:
https://www.yamaha.com/kbdapps/
You can connect the instrument to the smart device by
using the connection wizard of the “Smart Pianist.” To start
the connection wizard, tap [
] located at the upper le on
the “Smart Pianist” screen to open the menu, and then tap
“Instrument” → “Start Connection Wizard.”
NOTICE
When you activate “Smart Pianist” while the instrument is connected
to the smart device, the settings of the instrument are automatically
replaced by the settings on “Smart Pianist.” If you do not want the
instrument settings to be lost, save them to a USB ash drive or
a computer as backup data. For instructions, refer to the Owner’s
Manual of your instrument.
NOTE
While using “Smart Pianist” with the instrument, all buttons on the
instrument (with the exception of the [EXIT] button) cannot be used.
Control the instrument by using “Smart Pianist.” To disable “Smart
Pianist” and return to normal instrument control using the panel
buttons, press the [EXIT] button on the instrument.
– 1 –
Manual Development Group
© 2018 Yamaha Corporation
Published 04/2018 MW-A0