User Manual

Assembling the Clavinova
116
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
Remove all parts from the package and make sure
you have all of the items.
The power cord and AC adaptor may not be included, or may look different
from the illustration above, depending on your particular area. Please check
with your Yamaha dealer.
1. Attach E and F to D.
1-1. Remove the twist tie from the folded pedal
cord.
Don’t discard the twist tie, you’ll need it later in
step 6.
1-2. While pushing the lower part of E and F
from the outside, secure D using four 6 ×
20 mm round head screws.
2. Attach B.
2-1. Insert B between E and F as shown in the
illustration.
CLP-785 Assembly
A
B
C
D
FE
Foamed styrol pads
Remove foamed styrol pads from the package, position them on the
floor, then place A on top of them. Position the pads so that they will
not hide the connector panel on the bottom of A.
Connector
panel
Bundled pedal
cord inside
The pedals are covered with vinyl covers when
shipped from the factory. Before starting the
assembly, please make sure to remove the
cover from the damper pedal.
6 × 20 mm round head screws × 4
6 × 20 mm flat head screws × 6
4 × 14 mm round head screws × 10
Power cord
Cord holders × 2
4 × 10 mm thin screws × 2
Headphone hanger
AC adaptor
E
D
F
1-2
1-1
F
E
B
D
D
2-1
2-2
2-2
Proper way
to hold B