User Manual

System Menu
98
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
Keyboard Fixed Velocity (Pop-up
window)
Determines the velocity with which you play the keys
when Touch (above) is set to “Fixed.”
NOTE
The setting here will not be recorded to a MIDI Song and not
be transmitted as MIDI messages.
64 1 – 127
Duo (Setting
display)
Splits the keyboard into two ranges, allowing you to play
duets over the same octave range (page 38).
Off On, Off
Type – Selects the sound balance between the left and right
speakers while Duo is on.
• Separated: The sound of the left-hand range is output
from the left speaker(s), and the sound of the right-
hand range is output from the right speaker(s).
• Balanced: The sounds played by two players are
output through both speakers, with a natural balance of
sound.
Separated Separated,
Balanced
Split Point (Setting
display)
Determines the Split Point (the boundary between the
right-hand and left-hand keyboard areas).
F 2 (Split),
E3 (Duo)
A-1 – C7
Pedal Half Pedal Point (Pop-up
window)
Here you can specify the point to which you must
depress the right pedal before the assigned effect
begins to be applied. This setting applies only to the
“Sustain Continuously” effect (page 91) that is assigned
to the right pedal.
0 -2 (effective with
the shallowest
press) – 0 – +4
(effective with the
deepest press)
Soft Pedal
Depth
(Pop-up
window)
Determines how deeply the Soft pedal effect is applied.
This parameter is available only for the pedal to which
“Soft” (page 91) is assigned.
51 – 10
Pitch Bend
Range
(Pop-up
window)
Determines the range of the pitch bend that is produced
via the pedal in semitone steps. This setting is available
only for the pedal to which “Pitch Bend Up” or “Pitch
Bend Down” (page 91) is assigned.
NOTE
For some Voices, the pitch may not be changed according to
the Pitch Bend Range value set here.
2 0 – +12 (pressing
the pedal will
raise/lower the
pitch by 12
semitones
[1 octave])
Aux Polarity
(CLP-785/
795GP)
– A pedal connected to the [AUX PEDAL] jack may switch
on and off differently. For example, some pedals turn the
effects on and others turn them off when you press them.
Use this parameter to reverse this mechanism.
Make Make, Break
Aux Assign
(CLP-785/
795GP)
(Setting
display)
Assigns a function to the pedal connected to the [AUX
PEDAL] jack.
Expression Refer to the Pedal
Function List
(page 91).
Aux Area
(CLP-785/
795GP)
(Setting
display)
Determines the keyboard area to which the function of
the pedal connected to the [AUX PEDAL] jack is applied.
All All, Right, Left
Play/Pause (Setting
display)
Assigns the [PLAY/PAUSE] button’s function to one of the
Left pedal, Center pedal and pedal connected to the
[AUX PEDAL] jack (CLP-785/795GP). If a value other
than “Off” is selected here, the corresponding pedal's
function assigned in the “Voice” menu (page 89) is
disabled.
Off Off, Left, Center,
AUX (CLP-785/
795GP)
Sound Brilliance (Setting
display)
Adjusts the overall brilliance of sound for this instrument.
You can also select “User” to make your own custom EQ
settings. For details, refer to page 33.
Normal Mellow 1 – 3,
Normal,
Bright 1 – 3, User
IAC – Turns the IAC effect on or off. For details about IAC, refer
to page 21.
On On, Off
To call up the desired parameter:
Press the [FUNCTION] button several times to select “System” menu, then use
the [u]/[d]/[<]/[>] buttons to select the desired parameter.
[>]
[<]
[>]
[<]
[>]
[<]
Description Default setting Setting range
785 775
745 735
795GP
765GP