Operation Manual

CLP-810S

2 3

● Align the cut corner of

the bracket with the

corresponding cutouts

on the feet.

5 x 40 mm long gold screws 1

6 x 20 mm round-head screws 2

Assemble the side panels (D) and feet (E).

Secure the feet (E) to the side panels (D) with the 5 x 40

millimeter long gold-colored screws 1 (3 each), making sure

that the cutouts on the feet face the bracket side of the side pan-

els.

Attach the side panels (D) to the pedal box

(C).

Before installing the pedal box, untie and straighten out the

bundled cord attached to the bottom of the pedal box. Don’t dis-

card the vinyl tie, you’ll need it later in step N.

Place the pedal box on top of the brackets attached to the side

panels (D), and attach using the four 6 x 20 millimeter round-

head screws 2 — two screws on each side. Make sure the pedals

extend in the same direction as the feet.