Operation Manual

7
CLP-810S
Playing the Clavinova
Turn Power On ..................................................................................................
After making sure that the Clavinova’s AC cord is properly plugged
into the Clavinova itself and plugged into a convenient AC wall outlet,
press the [POWER] switch located to the right of the keyboard to turn
the power ON. In some areas a plug adaptor may be provided to match
the pin configuration of the AC wall outlets in your area.
When the power is turned ON, the POWER indicator located to the
left of the keyboard will light.
Set the Volume..................................................................................................
Initially set the [MASTER VOLUME] control about half way
between the “MIN” and “MAX” settings. Then, when you start playing,
re-adjust the [MASTER VOLUME] control for the most comfortable
listening level.
Select the Normal or Variation Voice........................................
Use the [VARIATION] selector to select the Clavinova’s normal or
variation voice.
In the OFF position, the keyboard’s normal piano voice is selected.
In the ON position, a variation of the keyboard’s piano voice is se-
lected.
POWER
Play................................................................................................................................
The Clavinova offers keyboard touch response, so the volume and
timbre of notes played can be controlled according to how “hard” you
play the keys.
Add Reverb as Required........................................................................
With the [REVERB] control, you can add a desired amount of
reverb to the Clavinova’s sound (page 9).
MIN MAX
MASTER
VOLUME
OFF ON
VARIATION
MIN MAX
REVERB