Owner manual

98 CLP-970
Questions about Operations and Functions
■ I cannot change the key signature in the song
after recording.
Press the [STOP] button to locate the top of the
song, use the B [–]/[+] buttons to locate the mea-
sure in which you wish to change the key signature,
then change it.
■
How much data can I record?
• Current memory (page 50): About 600KB
• Storage memory (page 50): About 750KB
• 2DD floppy disk (page 13): about 720KB
• 2HD floppy disk (page 13): about 1.4MB
■
The on/off setting of the pedal connected to the
AUX PEDAL jack is reversed.
Some types of pedals may turn on and off in oppo-
site fashion. Use the “AuxPedalType” parameter
(page 89) in the “OTHER SETTING” menu to
change the external pedal setting.
■
The song title is not correct.
The “CharacterCode” setting may be different than
that used when you named the song. Also, if the
song was recorded on another instrument, the title
might be displayed incorrectly. Use the “Character-
Code” parameter (page 56) in the FILE menu to
change the setting. However, if the song was
recorded on another instrument, changing the
“CharacterCode” parameter setting may not resolve
the problem.
■
What is the difference between “TouchSense”
and “TouchResponse” MIDI data?
“TouchSense” determines the manner and degree
to which the volume level changes in response to
your touch on the keyboard. It causes MIDI exclu-
sive data (that controls the tone generator) to be
output.
“TouchResponse” determines the touch sensitivity
as an instrument and causes MIDI note-on velocity
data to be output.