IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped.
SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep these precautions in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: • Do not open the instrument or attempt to disassemble the internal parts or modify them in any way.
PRECAUTIONS CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: • Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.
CLP-970.E.book Page 5 Monday, December 11, 2000 5:01 PM PRECAUTIONS ■ USING THE BENCH (If included) • Do not play carelessly with or stand on the bench. Using it as a tool or step-ladder or for any other purpose might result in accident or injury. • Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury. • If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool.
CLP-970.E.book Page 6 Monday, December 11, 2000 5:01 PM Thank you for choosing the Yamaha Clavinova CLP-970/970M/970C. In order to make the most of your Clavinova’s performance potential and features, please read this Owner’s Manual thoroughly, and keep it in a safe place for later reference. About this Owner’s Manual and Reference Booklet This manual consists of four main sections: “Introduction,” “Basic Operation,” “Detailed Settings,” and “Appendix.” Also, a separate “Reference Booklet” is provided.
Table of contents Introduction.......................................................... 2 PRECAUTIONS ........................................................................................................................................ 3 About this Owner’s Manual and Reference Booklet..................................................................................................... 6 Table of contents .....................................................................................................
Table of contents Changing a voice or tempo after recording ........................................................................................................... 47 Adjusting the volume balance between playback and your performance [SONG BALANCE] ......................... 48 Recording in Dual or Split mode ........................................................................................................................... 49 Saving Recorded Songs and Handling the Files...[FILE] ................
Table of contents Selecting the chorus type [Chorus Type]..................................................................................................................... 80 Setting the chorus depth [ChorusSend]*..................................................................................................................... 80 Setting the chorus on/off [ChorusOnOff]...................................................................................................................
Table of contents Appendix ............................................................ 99 Troubleshooting................................................................................................................................. 100 Data Compatibility ............................................................................................................................. 101 Preset Voice List ........................................................................................................
Application Index Use this index to find reference pages that may be helpful for your application and situation. Listening Listening to demo songs...............................................“Listening to the Demonstration Tunes” on page 24 “Playing the 50 piano preset songs” on page 26 Listening to demo songs with different voices ............“Listening to the Demonstration Tunes” on page 24 Listening to songs from “50 greats for the Clavinova” .......
Application Index Use this index to find reference pages that may be helpful for your application and situation. Settings Making detailed settings for recording and playback ............................................“Detailed settings for recording and playback [SONG SETTING]” on page 74 Making detailed settings for the metronome ......................................... “Detailed settings for the metronome METRONOME [SETTING]” on page 77 Making detailed settings for the voices ..........................
Handling the Floppy Disk Drive(FDD) and Floppy Disk Precautions Be sure to handle floppy disks and treat the disk drive with care. Follow the important precautions below. Compatible Disk Type 3.5" 2DD and 2HD type floppy disks can be used. Inserting/Ejecting Floppy Disks To insert a floppy disk into the disk drive: Hold the disk so that the label of the disk is facing upward and the sliding shutter is facing forward, towards the disk slot.
Handling the Floppy Disk Drive(FDD) and Floppy Disk About the Floppy Disks • To protect your data (Write-protect Tab): • To handle floppy disks with care: • To prevent accidental erasure of important data, slide the disk’s write-protect tab to the “protect” position (tab open). • Do not place heavy objects on a disk or bend or apply pressure to the disk in any way. Always keep floppy disks in their protective cases when they are not in use.
Included Accessories “50 greats for the Clavinova” Score Collection Owner’s Manual Recording disk Save your recorded performance to this disk.
Features The Yamaha Clavinova CLP-970 digital piano offers unmatched sonic realism and natural grand-piano type playability as well as Yamaha’s original “AWM Dynamic Stereo Sampling” tone generation technology for rich, musical voices, and a special “Graded Hammer” keyboard that provides graded key weight and response throughout the keyboard range. The CLP-970 GrandPiano1 voice features totally new samples painstakingly recorded from a full concert grand piano.
Features The display allows accurate control and operation. (page 23) The Clavinova includes 50 preset songs. This section enables you to listen to these songs, practice using a convenient practice function, play back Clavinova music data (sold in music stores), and record and play back your performance. (page 26, 41, 57) MAIN voice gruop buttons Select voices from 25 internal sounds including Grand Piano 1. (page 30) You can also combine two voices at a time.
Before Using the Clavinova Key cover To open the key cover: Lift the cover slightly, then push and slide it open. To close the key cover: Slide the cover toward you and gently lower the cover over the keys. Be careful to avoid catching your fingers when opening or closing the cover. CAUTION Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed.
Before Using the Clavinova Turning the power on 1. Connect the power cable. First insert the plug of the power cable into the AC connector on the Clavinova, then plug the other end of the cable into the proper AC outlet on the wall. In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area. 1 The power connector is located on the bottom of the keyboard, set back deeply. 2 (The shape of plug differs depending on locale.
Before Using the Clavinova Adjusting the display contrast You can adjust the contrast of the display by turning the [CONTRAST] knob located to the right of the LCD. Use this knob. A CONTRAST B NO YES TERMINOLOGY CONTRAST: difference between brightness and darkness EXIT C D Setting the volume While playing the keyboard, adjust the volume level by moving the [MASTER VOLUME] slider on the left of the front panel to the left or right.
Basic Operation 21 CLP-970 CLP-970 21
Part Names D H F A B CONTRAST PIANO E. PIANO/ BASS HARPSICHORD MALLET ORGAN PIANO/ E.
Part Names Connectors U AUX OUT [R] [L/L+R]..........................P61 V AUX IN [R] [L/L+R] .............................P62 W [AUX PEDAL] ......................................P62 X [TO HOST] ..........................................P62 Y HOST SELECT ..................................... P62 Z MIDI [IN] [OUT] [THRU] .................... P63 [ [PEDAL] ..............................................
Listening to the Demonstration Tunes The Clavinova provides demonstration tunes that effectively demonstrate each of the MAIN voice groups. Refer to the table below for voice names and corresponding demo songs. Demonstration tunes Voice group Tunes PIANO E.PIANO/BASS HARPSICHORD MALLET ORGAN STRINGS/CHOIR Composer Chanson de l’adieu Original Le Coucou Original Organ Concerto Op.4 No.2 Original F.F. Chopin – L.C. Daguin – G.F.
Listening to the Demonstration Tunes 3. 4. Stop the playback. Press the button of the voice group being played or the [STOP] button. Exit from demo mode. Press the [DEMO] or [EXIT] button to exit from demo mode.
Listening to 50 Piano Preset Songs The Clavinova provides performance data of 50 piano songs. You can just listen to these songs (page 26) or use them for practice (page 28). You can also refer to the included “50 greats for the Clavinova” that contains the scores for 50 piano preset songs. Playing the 50 piano preset songs 1 DEMO CLP-970 METRONOME [START/STOP] SONG SELECT TRACK 1 TRACK 2 EXTRA TRACKS FILE METRONOME START/ STOP SETTING A B PIANO CONTRAST E. PIANO/ BASS HARPSICHORD PIANO/ E.
CLP-970.E.book Page 27 Monday, December 11, 2000 5:01 PM Listening to 50 Piano Preset Songs Adjusting the tempo You can use the TEMPO [DOWN]/[UP] buttons to adjust the playback tempo as required. The default tempo (the song’s original tempo) is set when you press the [DOWN] and [UP] buttons simultaneously. Press either of the SONG SELECT [ ]/[ ] buttons to return to the song select screen. A B NO C 3. YES TIP You can also use the D[–]/[+] buttons to change the tempo.
Listening to 50 Piano Preset Songs Practicing a one-hand part using 50 preset songs The 50 preset songs have separate left- and right-hand parts on individual tracks. You can turn the left- and right-hand parts on or off as required so you can practice the corresponding part (the part that is turned off) on the keyboard. The right-hand part is played by [TRACK 1] and the left-hand part is played by [TRACK 2].
Listening to 50 Piano Preset Songs 3. Stop playback. When playback is complete, it automatically stops and the Clavinova locates the top of the song. If you wish to stop playback in the middle of a song, press the [STOP] button. You can also pause playback by pressing the [START/PAUSE] button. Playback stops when you press the button. TIP Resetting the part playback Both parts are automatically turned ON whenever you select a new song.
Selecting and Playing Voices Selecting Voices 1 2 DEMO CLP-970 SONG SELECT TRACK 1 TRACK 2 EXTRA TRACKS FILE STOP START/ PAUSE REC SONG SETTING METRONOME START/ STOP SETTING A B PIANO CONTRAST MAIN voice group buttons E. PIANO/ BASS HARPSICHORD MALLET ORGAN PIANO/ E.
Selecting and Playing Voices Using the pedals The Clavinova has three foot pedals: damper pedal (right), sostenuto pedal (center), and soft pedal (left) that produce a range of expressive effects similar to those produced by the pedals on an acoustic piano. Damper (right) pedal When you press the damper pedal, the notes you play have a longer sustain.
Selecting and Playing Voices Adding variation to the sound [BRILLIANCE]/[REVERB]/[CHORUS] The Effect function enables you to add expression to the sound. The Clavinova effects include Brilliance, Reverb, and Chorus. [REVERB] [CHORUS] DEMO CLP-970 SONG SELECT TRACK 1 TRACK 2 EXTRA TRACKS FILE METRONOME START/ STOP SETTING A B PIANO CONTRAST E. PIANO/ BASS HARPSICHORD PIANO/ E.
Selecting and Playing Voices [REVERB] This control adds reverberation to the sound by simulating the natural reverberation of a concert hall. Procedure Pressing the [REVERB] button repeatedly toggles the reverb on and off. Even if the reverb effect is turned off, a “soundboard reverb” effect will be applied when the GrandPiano1 or GrandPiano2 voice is selected.
Selecting and Playing Voices Transposition ... [TRANSPOSE] The Clavinova’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set the transposition amount to “5,” playing key C produces pitch F.
Selecting and Playing Voices Combining two voices (Dual mode) You can play two voices simultaneously across the entire range of the keyboard. In this way, you can simulate a melody duet or combine two similar voices to create a thicker sound. Refer to “Voice Combination Examples (Dual and Split)” on page 105 for examples of effective voice combinations. The numbers on the upper row indicate the steps in Dual mode using voices from different groups.
Selecting and Playing Voices Dual mode using voices in the same voice group Procedure 1. 2. 3. Select a voice group. In normal play mode, press the desired MAIN voice group button. Select a voice. Use the A [–]/[+] buttons to select a voice. Select another voice. Use the B [–]/[+] buttons to select another voice in the same voice group. To use the identical voices, press the B [–]/[+] buttons once. To use different voices within the same voice group, press the B [–]/[+] buttons repeatedly.
Selecting and Playing Voices Splitting the keyboard range and playing two different voices (Split mode) Split mode enables you to play two different voices on the keyboard — one with the left hand and another with the right hand. For example, you can play a bass part using the Wood Bass or Electric Bass voice with the left hand, and a melody with the right hand. Refer to “Voice Combination Examples (Dual and Split)” on page 105 for examples of effective voice combinations.
Selecting and Playing Voices Voice group MAIN PIANO LEFT PIANO/E.PIANO E.PIANO/BASS BASS HARPSICHORD HARPSICHORD/MALLET MALLET ORGAN ORGAN/STRINGS STRINGS/CHOIR 4. F2 CLP-970 GrandPiano1 GrandPiano2 E.Piano1 E.
Selecting and Playing Voices To change the split point setting: Press the [SPLIT POINT] button, then use the D [–]/[+] buttons to specify the split point. (Optional) Press and hold down the [SPLIT POINT] button and play the key you wish to assign as the split point. A B NO C YES D Press the [EXIT] button to return to the main screen. 5. Exit Split mode and return to normal play mode. Press the voice group button that you pressed for the lefthand range.
Selecting and Playing Voices Using the metronome The Clavinova is built-in metronome (a device that keeps an accurate tempo) is a convenient feature for practice. 12 DEMO CLP-970 SONG SELECT TRACK 1 TRACK 2 EXTRA TRACKS FILE METRONOME START/ STOP SETTING A B PIANO CONTRAST E. PIANO/ BASS HARPSICHORD PIANO/ E.
Recording Your Performance TIP You can record your performance (audio data) to a cassette tape recorder or other recording devices via the AUX OUT connector. (see page 61.) This chapter explains how to record your performance using the Clavinova recording function. You can, for example, play back what you have played on the Clavinova keyboard for an effective practice aid. You can also record just the left-hand part, then practice the right-hand part while playing back the recorded left-hand part.
Recording Your Performance 2. 3. Select a voice. Select a voice (or voices) for recording (see page 30). NOTE Set the tempo in Step 3. Set the other parameters, such as reverb and chorus. Adjust the [MASTER VOLUME] slider to set the volume level to suit your preference. You can also use the slider to adjust the level during playback. After you set the tempo or if the record standby screen does not appear, press one of the SONG SELECT [ ] [ ] buttons once to return to the New Song screen.
Recording Your Performance 5. Play back the recorded performance. Press the [START/PAUSE] button to play back the recorded performance. When playback is complete, it automatically stops and the Clavinova locates the top of the song. To stop playback in the middle of a song, press the [STOP] button. You can also pause playback by pressing the [START/PAUSE] button. Playback stops when you press the button. NOTE To erase recorded data from a track, use the Channel Clear parameter in the “SONG SETTING” menu.
Recording Your Performance Re-recording TRACK 1 partially This section explains how to record part of a song again. Procedure 1. Pause the song at the beginning of the part you wish to re-record. Use the B [–]/[+] buttons while the playback screen is displayed to move through the measures or play back the recording and press the [START/PAUSE] button to locate a point slightly prior to the beginning of the part you wish to re-record. Playback screen A B NO C 2. 3.
Recording Your Performance Ending methods: Replace – The data after the point you stop recording will also be erased. Punch Out — The data after the point you stop recording will remain. 3-2 Keep holding down the [REC] button and press the [TRACK 1] button. TIP If you cancel recording by pressing the [REC] button, recording stops when you press the button. If you cancel recording by pressing the [STOP] button, the Clavinova locates the top of the song. The [TRACK 1] indicator flashes in red.
Recording Your Performance Recording to the third or more tracks [EXTRA TRACKS] You can continue recording other parts into tracks 3–16 [EXTRA TRACKS] one by one. Procedure 1. Hold down the [REC] button in step 2 in the “Recording to [TRACK2]” on page 45 and use the B [–]/[+] buttons to select a recording track (3–16). select a recording track (3-16) A B NO C 2. YES D While holding down the [REC] key, press the [EXTRA TRACKS] button. Then, follow the procedure beginning with Step 4 on page 42.
Recording Your Performance Changing a voice or tempo after recording You can change the voice and tempo after recording to change a song’s feel or to set a more suitable tempo. You can also change these elements in the middle of a song. Procedure 1. 2. 3. 4. Select a song you wish to change by using the SONG SELECT [ ] [ ] buttons. To change the voice or tempo in the middle of the song, specify the measure to change using the B [–]/ [+] buttons. Change the settings (voice, reverb, etc.).
Recording Your Performance Adjusting the volume balance between playback and your performance [SONG BALANCE] While recording multiple parts into tracks one by one, you can adjust the volume balance between the playback of the recorded parts and your current performance. Procedure 1. Press one of the SONG BALANCE [ ] [ ] buttons. A B NO C 2. YES D Adjust the song balance using the SONG BALANCE [ ] [ ] or D [–]/[+] buttons.
Recording Your Performance Recording in Dual or Split mode When you record in Dual or Split mode, the Clavinova records each voice onto a separate track. The following table shows how tracks are assigned to each voice. CAUTION When you record multiple parts into tracks one by one, or when you record new data over an existing song (see page 46), the existing data will be erased. Proceed with caution. In the following example, Tracks 1, 2, and EXTRA TRACKn have been selected for recording.
Saving Recorded Songs and Handling the Files...[FILE] File screens (accessed via the [FILE] button) enables you to handle song files (e.g., save, delete, and rename recorded songs), copy and format disks, and change the characters on the screen.
Saving Recorded Songs and Handling the Files...[FILE] Basic file operation A message (information or confirmation dialog) sometimes appears on the screen to facilitate operation. Refer to the “Message List” on page 92 for an explanation of each message, appropriate actions to take, and troubleshooting information. [FILE] DEMO CLP-970 SONG SELECT TRACK 1 TRACK 2 EXTRA TRACKS FILE METRONOME START/ STOP SETTING A B PIANO CONTRAST E. PIANO/ BASS HARPSICHORD PIANO/ E.
Saving Recorded Songs and Handling the Files...[FILE] Saving recorded or other songs to Clavinova Storage memory...[SaveToMemory] If you record a song, then turn off the power to the Clavinova, the song will be erased. To save the recorded song, you must save it into the Clavinova Storage memory or to a floppy disk. (To save a song to a floppy disk, refer to the next section [SaveToDisk].) You can also save the preset songs, disk songs, and additional or overwriting recordings (page 46) to Storage memory.
Saving Recorded Songs and Handling the Files...[FILE] Saving recorded or other songs to floppy disk...[SaveToDisk] You can save recorded songs, preset songs, Memory songs, and additional or overwriting recordings (page 46) songs onto a floppy disk. A B NO C YES D Procedure See page 51 for basic operation information. The following is a detailed procedure of Step 4. 4. Make sure that a formatted floppy disk (page 56) is inserted in the disk drive.
Saving Recorded Songs and Handling the Files...[FILE] 4-1 Select a song to delete. TIP If you select a Memory song or Disk song, deleting the song does not erase song data from Current memory. However, if you return to the song select screen, song information other than the song name is replaced by “--------------”. Use the C [–]/[+] buttons to select a song. 4-2 Execute the operation. Press the B [+ (YES)] button located next to “Execute?→.” Follow the instructions on screen.
Saving Recorded Songs and Handling the Files...[FILE] Copying data from one floppy disk to another...[CopyDisk] You can copy the entire contents of one floppy disk to another floppy disk. A B NO C YES D Procedure See page 51 for basic operation information. The following is a detailed procedure for Step 4. 4-1 Make sure that a formatted floppy disk is inserted in the disk drive. 4-2 Press the B [+ (YES)] button located next to “Execute?→.
Saving Recorded Songs and Handling the Files...[FILE] Formatting a floppy disk...[FormatDisk] You can format a floppy disk so that it can be used with the Clavinova. A B NO C YES D Procedure See page 51 for basic operation information. The following is a detailed procedure for Step 4. 4-1 Make sure that the formatted floppy disk is inserted in the disk drive. 4-2 Press the B [+ (YES)] button located next to “Execute?→.” Follow the instructions on screen.
Playing Back Recorded Songs and Commercially-available Music Data TIP See page 59 for information on the types of song data that can be played on the Clavinova. You can play back songs recorded using the Record function (page 41) as well as commercially-available music data. You can also play the keyboard along with the playback. Playing back a song To play back a song from a floppy disk, insert the disk into the disk drive.