Operation Manual

CLP-170/150 103
Questions about Operations and Functions
■ I cannot change the key signature in the
song after recording.
Press the [TOP] button to locate the top of the
song, use the B [–]/[+] buttons to locate the
measure in which you wish to change the key
signature, then change it.
■
How much data can I record?
• Current memory (page 48): About 800KB
• Storage memory (page 48): About 750KB
• 2DD floppy disk (CLP-170) (page 12): about
720KB
• 2HD floppy disk (CLP-170) (page 12): about
1.4MB
■
The on/off setting of the pedal connected to
the AUX PEDAL jack is reversed.
Some types of pedals may turn on and off in
opposite fashion. Use the “AuxPedalType”
parameter (page 84) in the “OTHER SET-
TING” menu to change the external pedal set-
ting.
■
The song title is not correct.
The “CharacterCode” setting may be different
than that used when you named the song. Also,
if the song was recorded on another instru-
ment, the title might be displayed incorrectly.
Use the “CharacterCode” parameter (page 54)
in the FILE menu to change the setting. How-
ever, if the song was recorded on another
instrument, changing the “CharacterCode”
parameter setting may not resolve the problem.
■
What is the difference between “Touch-
Sense” and “TouchResponse” MIDI data?
“TouchSense” determines the manner and
degree to which the volume level changes in
response to your touch on the keyboard. The
MIDI note-on velocity data is not changed. It
changes the volume level at the same velocity
data.
“TouchResponse” determines the touch sensi-
tivity of an instrument. The MIDI note-on
velocity data is changed when you play the key-
board with a consistent touch.