Operation Manual

Installing the Floppy Disk Drive (Optional)
CLP-240/230 Owner’s Manual
ENGLISH
70
Installing the Floppy Disk Drive (Optional)
The optional UD-FD01 floppy disk drive can be installed to the bottom of the CLP-240 by using the
included floppy disk drive case and screws.
1. Remove the three backing papers from
the adhesive tape in the case, and fit the
floppy disk drive into the case.
2. Fold the USB cable inside the case as
shown.
3. Attach the drive and case assembly to the
left underside of the instrument, using the
included four screws (4mm x 10mm).
4. Connect the USB cable to the USB [TO
DEVICE] terminal.
Have a Phillips-head (+) screwdriver ready.
Insert the drive to the case, with the side having
the rubber stoppers facing the case.
Dual-sided adhesive tape