User Manual

ManualsBrandsYamaha ManualsKeyboard SynthesizersMX49 II White - WHITE 49 KEYS SYNTHESIZER

Table Of Contents

MX49 MX61 MX88 Owner’s Manual

Playing the Voices

The instrument consists of 16 Parts. Voices, which are the

basic sounds and building blocks of the instrument, are

assigned to each Part. After the instrument is turned on,

the top display which appears shows the Voices of only

Parts 1 and 2. With the default settings, playing the

keyboard will sound only the Voice for Part 1. Select the

desired Voice from the various preset Voices and play it.

Top display

Selecting a Voice for Part 1

The Voices of the instrument are conveniently divided into

specific categories, each based on a general instrument

type or sound characteristic. In order to select a Voice,

first select a category.

Here, you’ll learn how to change Voices and play a Voice

while Part 1 is selected.

NOTE For lists of the Voices and categories, see the “DATA LIST”

PDF document.

1 Press the desired Voice Category button.

2 Rotate the [DATA] dial to select the desired

Voice in the selected category.

3 Play the keyboard.

4 Repeat steps 1 – 3 to play the various Voices.

Quick Guide

HINT

The instructions of the “Playing the Voices” section

assume that you are starting from the top display

with the default settings immediately after turning

this instrument on. If the instrument is in a different

status, or for some reason you cannot return to the

top display with the default settings, simultaneously

hold down [SHIFT] and press [SELECT]. This is the

Quick Reset function and allows you to return

operation to the same top display as when the

instrument is first turned on.

NOTICE

Executing the Quick Reset function above erases any

edited data. Be sure to store important data to internal

memory (page 29).

NOTE For details about this function, see the “Shift Function

List” (page 35).

STR:081:Amb

Pizza

AP 001:CncrtGrandc

001:CncrtGrandcAP

Voice for Part 1

Voice for Part 2

Voice