Owner`s manual

Recording Your Performance

CP300 Owner’s Manual

Basic Operation

When the recording track has been selected, the indicator for the [REC] button and selected track lights

up in red. (Record Ready mode can be disengaged before recording by pressing the [REC] button again.)

Set the Tempo, if necessary (page 38).

If this Record Standby display does not appear, press one of the SONG SELECT [N][O] buttons

once. If you select “Key On” as the Starting method (page 44), a Tempo setting of 120 will be entered at

the beginning of the Song.

4 Start recording.

You can start recording by pressing the [PLAY/PAUSE] button, or have recording started automatically

for you as soon as you play a note on the keyboard. The current measure number is shown in the display

during recording.

n Song recording can be paused by pressing the [PLAY/PAUSE] button. Recording will begin automatically as soon

as you play a note on the keyboard or press the [PLAY/PAUSE] button again.

5 Press either [STOP] button or [REC] button to stop recording.

Press the [STOP] button to return to the top of the Song.

6 Press the [PLAY/PAUSE] button to play back the recording.

n To erase recorded data from a track, use the “Channel Clear” parameter in the Song Setting menu for Song

playback/recording (page 86).

7 Save the recorded Song

When pressing the SONG SELECT [N][O] button, A [–][+] button or C [–][+] button, a “Song

Changed Save?” message appears in the display. Press the B [+ (YES)] button to save the ﬁle. If you want

to cancel the Save operation, press the B [– (NO)] button. For details about saving Song ﬁles, refer to

page 82.

SongRecording Bar 001

P-000:NewSong

NO YES

SongChanged Save?

NO YES