User Manual

Piano Block
CP1 Data List
5
[10] 78Rd II
[11] Dyno
[12] 69Wr, [13] 77Wr
[14] DXEP 1, [15] DXEP 2, [16] DXEP 3, [17] DXEP 4
12
---
13
---
14
---
15
Input Gain -18.0dB – +4.0dB 28 – 72
16
---
No. Parameter Range Value
Piano Type Parameters
1 Decay (Decay Time) -16 – +16 0 – 127
2 Release (Release Time) -16 – +16 0 – 127
3 Key-off (Key-off Noise Level) -16 – +16 48 – 80
4 StrkPos (Striking Position) Top3 to Top1, Default, or
Rear1 to Rear3
61 – 67
5 Hammer (Hammer Stiffness) Soft2, Soft1, Normal, Hard1,
or Hard2
62 – 66
Pre-amplifier Parameters
1 Bass -10.0 – +10.0 0 – 50
2 Treble -10.0 – +10.0 0 – 50
3 Vibrato Depth 0 – 10.0 0 – 50
4 Vibrato Speed 0 – 10.0 0 – 50
5 Volume 0 – 127 0 – 127
6---
7---
8---
9---
10 ---
11 ---
12 ---
13 ---
14 ---
15 Input Gain -18.0dB – +4.0dB 28 – 72
16 ---
No. Parameter Range Value
Piano Type Parameters
1 Decay (Decay Time) -16 – +16 0 – 127
2 Release (Release Time) -16 – +16 0 – 127
3 Key-off (Key-off Noise Level) -16 – +16 48 – 80
4 StrkPos (Striking Position) Top3 to Top1, Default, or
Rear1 to Rear3
61 – 67
5 Hammer (Hammer Stiffness) Soft2, Soft1, Normal, Hard1,
or Hard2
62 – 66
Pre-amplifier Parameters
1 Bass Boost 0 – 10.0 0 – 50
2 Normal 0 – 10.0 0 – 50
3 Overtone 0 – 10.0 0 – 50
4---
5 Volume 0 – 127 0 – 127
6---
7---
8---
9---
10 ---
11 ---
12 ---
13 ---
14 ---
15 Input Gain -18.0dB – +4.0dB 28 – 72
16 ---
No. Parameter Range Value
No. Parameter Range Value
Piano Type Parameters
1 Decay (Decay Time) -16 – +16 0 – 127
2 Release (Release Time) -16 – +16 0 – 127
3 Key-off (Key-off Noise Level) -16 – +16 48 – 80
4 StrkPos (Striking Position) Top3 to Top1, Default, or
Rear1 to Rear3
61 – 67
5 Hammer (Hammer Stiffness) Soft2, Soft1, Normal, Hard1,
or Hard2
62 – 66
Pre-amplifier Parameters
1 Bass -10.0 – +10.0 0 – 50
2 Mid Boost 0.0 – +10.0 0 – 50
3 Treble -10.0 – +10.0 0 – 50
4 Vibrato Depth 0-10.0 0 – 50
5 Volume 0 – 127 0 – 127
6 ---
7 ---
8 ---
9 ---
10 ---
11 ---
12 ---
13 ---
14 ---
15 Input Gain -18.0dB – +4.0dB 28 – 72
16 ---
No. Parameter Range Value
Piano Type Parameters
1 Decay (Decay Time) -16 – +16 0 – 127
2 Release (Release Time) -16 – +16 0 – 127
3 Rls Tone (Release Tone) 0 – 16 64 – 80
4 AtkTimbr (Attack Timbre) Soft2, Soft1, Normal, Hard1,
or Hard2
62 – 66
5 OscDetun (Oscillator Detune) -16 – +16 48 – 80
Pre-amplifier Parameters
1 Low -12.0dB – +12.0dB 40 – 88
2 Low Middle -12.0dB – +12.0dB 40 – 88
3 High Middle -12.0dB – +12.0dB 40 – 88
4 High -12.0dB – +12.0dB 40 – 88
5 Volume 0 – 127 0 – 127
6 ---
7 ---
8 ---
9 ---
10 ---
11 ---
12 ---
13 ---
14 ---
15 Input Gain -18.0dB – +4.0dB 28 – 72
16 ---