User Manual

Voice Parameters
34
Figure 40: Amplitude Scale
A: Break Point 1
B: Break Point 2
C: Break Point 3
D: Break Point 4
X: Note
Y: Amplitude
1-2-11 LFO (Low-Frequency Oscillator)
The Low-Frequency Oscillator (LFO) unit of the tone generator block generates a low-
frequency signal.
The signal from the LFO can be used to modulate the pitch, filter, and amplitude. Modulating
the pitch produces a vibrato effect, modulating the filter produces a wah effect, and modulating
the amplitude produces a tremolo effect.
You can set the Common LFO which set the basic LFO parameters common to all Elements
of the Voice. Also, you can set the Element LFO which set the LFO parameters for each
individual Element.
ABCD
76
90
97
84
X
Y
Break Point 1 - 4 Determines the four Amplitude Scale Break Points by specifying their
respective note numbers.
Offset 1 - 4 Determines the offset value of the level of each Amplitude Scale Break
Point.
LFO Wave Selects the Wave and determines how the LFO waveform modulates the
sound.
Play Mode Determines whether the LFO cycles repeatedly (loop) or only once (one
shot).
Speed Determines the speed of the LFO Wave.
The higher the value, the faster the speed.