Manualshelf

User Manual

ManualsBrandsYamaha ManualsStage KeyboardsThe Ultimate Stage Piano
51525354555657585960
Effects
56
2-3 Effect Parameters
2-3-1 A
2-3-2 B
2-3-3 C
AEG Phase Offsets the phase of the Amplitude EG.
AM Depth Determines the depth of Amplitude Modulation.
AM Inverse R Determines the phase of the Amplitude Modulation for the R channel.
AM Speed Determines the Amplitude Modulation speed.
AM Wave Selects the wave for modulating the Amplitude.
AMP Type Selects the amplifier type to be simulated.
Analog Feel Adds the characteristics of an analog flanger to the sound.
Attack Determines the amount of time that elapses between the playing of a key
and the start of the compressor effect.
Attack Offset Determines the amount of time that elapses between the playing of a key
and the start of the wah effect.
Attack Time Determines the attack time of the envelope follower.
Bit Assign Determines how Word Length is applied to the sound.
Bottom Determines the minimum value of the wah filter.
The Bottom parameter is available only when the value is less than that of
the Top parameter.
BPF1-10 Gain Determines each output gain of BPFs 1 - 10 of the Vocoder effect.
Click Density Determines the frequency at which the click sounds.
Click is the click sound of a metronome, that can be sounded during
playback or recording.
Click Level Determines the click level.
Color Determines the fixed phase modulation.
The Color parameter may not be effective depending on the values of the
Mode and Stage parameters.
Common Release Determines the amount of time that elapses between the releasing of a
note and the end of the effect.
This is a parameter of Multi Band Comp.
Compress Determines the minimum input level at which the compressor effect is
applied.
Comp Attack Determines the amount of time that elapses between the playing of a key
and the start of the compressor effect.
Comp Release Determines the amount of time that elapses between the releasing of a
note and the end of the compressor effect.
Comp Threshold Determines the minimum input level at which the compressor effect is
applied.
Comp Ratio Determines the ratio of the compressor.