User Manual

Before Using the CP300
CP300 Owner’s Manual
12
Introduction
If you are using a set of headphones, connect them to the [PHONES] jack.
Do not use headphones at a high volume for an extended period of time. Doing so may cause hearing loss.
n If the [SPEAKER] button is lit, this indicates that the built-in speakers sound normally when using the
headphones.
Make sure the volume setting of the CP300 and external devices are turned down to the minimum.
Press the [POWER] switch to turn the power on.
The display located in the center of the front panel lights up.
Press the [POWER] switch again to turn off the power to the CP300.
The display will disappear.
Using Headphones
Tur ning the Power On
PHONES jack
CAUTION
POWER
ON
OFF
MIN MAX
MASTER VOLUME
POWER
ON!
****** PleaseWait ******
****** YAMAHA ******
NO YES
A
B
D
C
Grand Piano 1
NO YES
A
B
D
C