User Manual

CP300 Owner’s Manual
56
Reference
Detailed Settings for the Voices—Voice Edit
You can make detailed settings for Voice. You can make these settings for each Voice (or each combination of Voices)
individually.
1 Select the desired Voice or combination of Voices.
For instructions on how to select a Voice, see page 25.
2 Press the [VOICE EDIT] button to access the Voice Edit menu.
3 Use the A [–][+] buttons to select the part for which you wish to change the Voice.
The range of the displayed part varies depending on the selected Voice.
n For details about the split point settings between the Main part and Left part, refer to the “To Change the Split
Point Setting” (page 32) or the “Split Point” parameter in the Other Settings menu (page 69). The split point
settings for the Layer part and Left Layer part can be changed via the “Split Point 2” parameter in the Other
Settings menu (page 69).
For information about the parameters and their values, refer to “Parameters” on page 58.
Voice Edit—Basic Operation
Voice Part Display Setup
MAIN Voices (displayed with a single
Voice or in Split mode)
The Main part Voice can be set.
Displayed when the MAIN side is in
Dual mode
The Main part Voice and Layer
part Voice can be set.
Displayed in Split mode
The Left part Voice can be set.
Displayed when the LEFT side is in Dual
mode
The Left part Voice and Left
Layer Voice can be set.
Main
Main Set?-->
Octave 0
Main x Layer
MainXLayer Set?-->
Octave(GrndPno1) 0
Left
Left Set?-->
Octave 0
Left x Left Layer
LeftXLeftLayer Set?-->
Octave(GrndPno1) 0