User Manual

Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
57
Reference
4 Use the C [–][+] buttons to select a target item.
You can change the Voice for each part when Main x Layer or Left x Left Layer is selected in Step 3 (in
Dual mode). The target Voice name will be displayed in parentheses.
5 Use the D [–][+] buttons to change the value.
Press the [–][+] buttons simultaneously to instantly reset to the default setting.
6 Press the B [+ (YES)] button to execute the job.
To proceed, press the B [+ (YES)] button again. An “Executing” message appears and the data is saved.
When the operation is complete, a “Completed” message appears briefly, then returns to the previous
display.
n This setting will be retained even if you turn off the power to the CP300. The previous settings will be restored
when you turn on the power next time and the same Voice or part you selected before turning the power off will
automatically be selected.
7 Press the [EXIT] button to exit from the Voice Edit settings.
MainXLayer Set?-->
Octave(GrndPno1) 0
NO YES
A
B
DC
Main Set?-->
Octave 0
NO YES
A
B
DC
Main Executing
Octave 0
NO YES
A
B
DC