User Manual

Voice Parameters
27
Figure 30: Filter Scale
A: Break Point 1
B: Break Point 2
C: Break Point 3
D: Break Point 4
X: Note
Y: Cutoff Frequency
1-2-8 Amplitude
The Amplitude unit controls the output level (amplitude or volume) of the sound output from the
Filter. The signals are sent at this output level to the Effect block (see Chapter 2 Effects).
By setting the Amplitude Envelope Generator (AEG), you can control how the Amplitude
changes over time.
60
ABCD
X
74
81
68
Y
Break Point 1 - 4 Determines the four Filter Scale Break Points by specifying their respective
note numbers.
Offset 1 - 4 Determines the offset value of the Cutoff Frequency of each Filter Scale
Break Point.
Level Determines the output level of the Element or Drum Key.
Level Velocity
Sensitivity
Determines how the output level of the Element or Drum Key responds to
Velocity.
 Positive values: The output level rises the harder you play the
keyboard.
 Negative values: The output level rises the softer you play the
keyboard.
 0: The output level does not change.