manual

32 CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
Reference
Performances
Editing Performances
Common Edit Area
01: Chorus Effect
02: Reverb Effect
03: General
04: Name
Part Edit Area
01: Play Mode
02: Filter/EG
03: Effect-A
04: Effect-B
05: Controller
06: Receive Switch
Master Keyboard Area
Job Area
01: Recall
02: Copy
03: Bulk
Store Performance Function
Compare Performance Function
File Area
01: Save
02: Load
03: Rename
04: Delete
05: Format
06: Memory Info
Utility Area
01: General
02: MIDI
03: Controller
04: MasterComp
05: Master EQ
06: Panel Lock
Utility Job Area
01: Factory Set
02: Version
Appendix
File functions
A total of six different functions can be executed from the File area — Save, Load, Rename, Delete,
Format, and Memory Info.
NOTE The functions from the File area can be used only with All-type files, which have a .C7A (CP4 STAGE) or
.C8A (CP40 STAGE) file extension. They cannot be used to process audio files, which have a .wav file
extension.
01: Save
The Save function is used to store all data from the instrument’s User Memory in the form of an All-
type file. This file must be saved to the USB flash-memory device’s root directory, and it will be
given a .C7A (CP4 STAGE) or .C8A (CP40 STAGE) file extension.
NOTE Before carrying out the steps described below, ensure that the USB flash-memory device is plugged
into the instrument’s [TO DEVICE] USB terminal. If this is not the case, the instrument will display the
message “USB device not ready” instead of the Save screen.
NOTE The File menu is the first screen displayed when the [FILE] button is pressed.
NOTE Before executing File functions, the instrument will display the Confirmation popup to confirm that you
wish to proceed (“Are you sure?”). You can press the [+1/YES] button to execute the File function or the
[-1/NO] button to return to the previous screen without doing so.
01: Save selected in Step 2:
File name entered in Step 3:
Confirmation popup from Step 4:
1 FILE Save
This shows that you are on the File area’s Save screen.
2 Name
This parameter is used to enter a name (between the square brackets) for the file to be saved to the
USB flash-memory device. Move the flashing cursor within the name field using the [l] and [r]
buttons, and change the character at each position using the [-1/NO] and [+1/YES] buttons or the
Data Dial. Files can be named using alphanumeric characters and symbols, and they can be up to
eight characters long.
3 Are you sure?
This message is displayed before executing the Save function. Press the [+1/YES] button to save
your data. Alternatively, press the [-1/NO] button to return to the previous screen. To cancel saving,
press the [EXIT] button while the “Now saving...” message is displayed.
NOTE If a file with the same name as the one entered on the Save screen already exists on the USB flash-
memory device, the instrument will display the message “Overwrite?” to confirm whether that file should
be overwritten.
Procedure 1. Press the [FILE] button.
2. On the File menu, press the [u] button to select 01: Save, and then press the [ENTER] button.
3. Use the [-1/NO] and [+1/YES] buttons or the Data Dial to enter a file name, and then press the
[ENTER] button.
4. When the Confirmation popup is displayed, press the [+1/YES] button to save the data.
FILE
D01:Save
Press the [ENTER] button.
FILE
Save
Name
[STAGE_01]
1 2
Press the [ENTER] button.
Are you
[NO]
sure?
/[YES]
3