User Manual

CP5 / CP50 Data List 23
Effect Parameter List for Other Group
[2] 2 MODULATOR
[3] SPX CHORUS
[4] ENSEMBLE DETUNE
Category — FLANGER
[1] CLASSIC FLANGER
[2] TEMPO FLANGER
[3] DYNAMIC FLANGER
Category — PHASER
[1] TEMPO PHASER
[2] DYNAMIC PHASER
No. Parameter Range Value Control
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127)
2 AM Depth 0 – 127 (0 – 127)
3 PM Depth 0 – 127 (0 – 127)
4 Feedback Level -63 – +63 (1 – 127)
5 Delay Offset 0.0ms – 50.0ms (0 – 127)
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 22.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54)
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —
No. Parameter Range Value Control
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127)
2 LFO Depth 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Delay Offset 0.0ms – 50.0ms (0 – 127)
5—
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 22.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54)
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —
No. Parameter Range Value Control
1 Detune -50cent – +50cent (14 – 114)
2 Initial Delay Lch 0.0ms – 50.0ms (0 – 127)
3 Initial Delay Rch 0.0ms – 50.0ms (0 – 127)
4 Spread 0 – 63 (0 – 63)
5—
6—
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 – 14: Same as the parameters shaded in gray in CROSS DELAY on page 22.
15 —
16 —
No. Parameter Range Value Control
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127)
2 LFO Depth 0 – 127 (0 – 127)
3 LFO Wave Triangle, Sine, Random (0 – 2)
4 Delay Offset 0.09 – 36.21ms (0 – 139)
5 Feedback Level -100 – +100% (0 – 200)
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 22.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54)
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 Modulation Phase -180 – +180 (0 – 16)
15 Feedback High Damp 0.1 – 1.0 (1 – 10)
16 Analog Feel 0 – 10 (0 – 10)
No. Parameter Range Value Control
1 LFO Speed 16th – 4thx16 (5 – 29)
2 LFO Depth 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Delay Offset 0.0ms – 50.0ms (0 – 127)
5—
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 22.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54)
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 LFO Phase Difference -180deg – +180deg (4 – 124)
15 —
16 —
No. Parameter Range Value Control
1 Sensitivity 0 – 127 (0 – 127)

2 Delay Offset 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Attack Time 0.3ms – 227ms (0 – 127)
5 Release Time 2.6ms – 2171ms (0 – 127)
6 Release Curve 0 – 127 (0 – 127)
7 Direction up, down (0 – 1)
8 Dyna Threshold Level 0 – 127 (0 – 127)
9 Dyna Level Offset 0 – 127 (0 – 127)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 22.
No. Parameter Range Value Control
1 LFO Speed 16th – 4thx16 (5 – 29)
2 LFO Depth 0 – 127 (0 – 127)
3 Phase Shift Offset 0 – 127 (0 – 127)
4 Feedback Level -63 – +63 (1 – 127)
5—
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 22.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)

11 Stage 4 – 22 (4 – 22)
12 Diffusion mono, stereo (0 – 1)
13 —
14 —
15 —
16 —
No. Parameter Range Value Control
1 Sensitivity 0 – 127 (0 – 127)

2 Dyna Level Offset 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Attack Time 0.3ms – 227ms (0 – 127)
5 Release Time 2.6ms – 2171ms (0 – 127)
6 Release Curve 0 – 127 (0 – 127)
7 Direction up, down (0 – 1)
8 Dyna Threshold Level 0 – 127 (0 – 127)
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Stage 4, 5, 6 (4 – 6)
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 22.