User Manual

CP5 / CP50 Data List 26
Effect Parameter List for Other Group
[3] DYNAMIC FILTER
[4] AUTO SYNTH
[5] ISOLATOR
*3: On/off Switch cannot be controlled using the pitch bend wheel.
[6] TECH MODULATION
Category — MISC
[1] VCM EQ 501
[2] HARMONIC ENHANCER
[3] Talking Modulator
No. Parameter Range Value Control
1 Filter Type LPF (12dB), LPF (18dB), LPF
(24dB), HPF, BPF, BEF
(0 – 5)
2 Sensitivity 0 – 127 (0 – 127)

3 Dyna Level Offset 0 – 127 (0 – 127)
4 Resonance -16 – +111 (0 – 127)
5 Attack Time 0.3ms – 227ms (0 – 127)
6 Release Time 2.6ms – 2171ms (0 – 127)
7 Release Curve 0 – 127 (0 – 127)
8 Direction up, down (0 – 1)
9 Dyna Threshold Level 0 – 127 (0 – 127)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 22.
No. Parameter Range Value Control
1 Mod Speed 0 – 127 (0 – 127)

2 Mod Wave Type Type A, Type B, Type C,
Type D
(0 – 3)
3 Mod Depth 0 – 127 (0 – 127)
4 Mod Depth Ofst R -63 – +63 (1 – 127)
5 HPF Cutoff Frequency 20Hz – 8.0kHz (0 – 52)
6 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60)
7 Delay Time 0.1 – 370.0ms (1 – 3700)
8 Delay Time Ofst R 0 – 884 (0 – 884)
9 Delay Level 0 – 127 (0 – 127)
10 Dry Mix Level 0 – 127 (0 – 127)
11 Feedback Level -63 – +63 (1 – 127)
12 FB Level Ofst R -63 – +63 (1 – 127)
13 AM Speed 0.00Hz – 39.7Hz (0 – 127)
14 AM Wave tri, sine, saw up, saw down (0 – 3)
15 AM Depth 0 – 127 (0 – 127)
16 AM Inverse R normal, inverse (0 – 1)
No. Parameter Range Value Control
1 On/off Switch on, off (0 – 1)
*3
2 Low Level -64 – +63 (0 – 127)
3 Mid Level -64 – +63 (0 – 127)
4 High Level -64 – +63 (0 – 127)
5 Low Mute off/on (0 – 1)
6 Mid Mute off/on (0 – 1)
7 High Mute off/on (0 – 1)
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Control
1 Mod Speed 0 – 127 (0 – 127)

2 Mod Depth 0 – 127 (0 – 127)
3 Mod Gain -12 – +12dB (52 – 76)
4 Mod Mix Balance D63>W – D=W – D<W63 (1 – 127)
5 Pre Mod HPF Cutoff
Frequency
20Hz – 8.0kHz (0 – 52)
6 Mod LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60)
7 Mod LPF Resonance 1.0 – 12.0 (10 – 120)
8 Delay Time 0.1 – 740.0ms (1 – 7400)
9 Delay Time Ofst R 0 – 884 (0 – 884)
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Feedback Level -63 – +63 (1 – 127)
12 FB Level Ofst R -63 – +63 (1 – 127)
13 Feedback Hi Damp 0.1 – 1.0 (1 – 10)
14 FB Hi Damp Ofst R -0.9 – +0.9 (1 – 19)
15 —
16 —
No. Parameter Range Value Control
1 EQ1 (LSH) Frequency 31.5Hz – 2.0kHz (12 – 84)
2 EQ1 (LSH) Gain -12.0dB – +12.0dB (60 – 300)
3 EQ2 Q 0.50 – 16.00 (0 – 60)
4 EQ2 Frequency 50.0 Hz – 20.0kHz (20 – 124)
5 EQ2 Gain -18.0dB – +18.0dB (0 – 360)
6 EQ3 Q 0.50 – 16.00 (0 – 60)
7 EQ3 Frequency 50.0 Hz – 20.0kHz (20 – 124)
8 EQ3 Gain -18.0dB – +18.0dB (0 – 360)
9 EQ4 Q 0.50 – 16.00 (0 – 60)
10 EQ4 Frequency 50.0 Hz – 20.0kHz (20 – 124)
11 EQ4 Gain -18.0dB – +18.0dB (0 – 360)
12 EQ5 (HSH) Frequency 500Hz – 20.0kHz (60 – 124)
13 EQ5 (HSH) Gain -12.0dB – +12.0dB (60 – 300)
14 Output Level -12.0dB – +12.0dB (60 – 300)
15
16
No. Parameter Range Value Control
1 HPF Cutoff Frequency 500Hz – 16.0kHz (28 – 58)
2 Drive 0 – 127 (0 – 127)
3 Mix Level 0 – 127 (0 – 127)
4—
5—
6—
7—
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Control
1 Vowel a/i/u/e/o (0 – 4)

2 Move Speed 1 – 62 (1 – 62)
3 Drive 0 – 127 (0 – 127)
4 Output Level 0 – 127 (0 – 127)
5—
6—
7—
8—
9—
10 —
11 —
12 —
13 —
14 —
15 —
16 —