User Manual

CP5 / CP50 Data List 34
Bank Select Bulk Dump Block
MIDI Data Table
Available Bank Select/Program Change
Parameter Base Address
“Top Address” indicates the top address of each block designated by bulk dump operation.
“Byte Count” indicates the data size contained in each block designated by bulk dump
operation.
The Block from the Bulk Header to the Bulk Footer of the Performance can be received
regardless their order.
They can be received even if all of them are not transmitted. They cannot be received if the
irrelevant Block is included.
To execute 1 Performance bulk dump request, designate its corresponding Bulk Header
address.
When the Multiple Bulk Control Footer is received, Performances will be saved to the Flash
ROM.
For the information about “mm” and “nn” shown in the following list, refer to MIDI
PARAMETER CHANGE TABLE (BULK CONTROL).
MSB (HEX) LSB (HEX) Program No. Type Memory
63 3F 64 40 0 – 39 Performance PRE1
65 41 0 – 39 Performance PRE2
66 42 0 – 39 Performance PRE3
67 43 0 – 39 Performance USR1
68 44 0 – 39 Performance USR2
69 45 0 – 39 Performance USR3
70 46 0 – 39 Performance EXT1
71 47 0 – 39 Performance EXT2
72 48 0 – 39 Performance EXT3
DescriptionParameter Block Top Address
H M L
SYSTEM 00 00 00 System
00 20 00 Master EQ
00 21 00 Master Comp
BULK CONTROL 0E 00 00 Header
0F 00 00 Footer
MULTIPLE BULK CONTROL 10 00 00 Header
11 00 00 Footer
PERFORMANCE COMMON 30 00 00 Performace Common
PERFORMANCE PART 31 00 00 Part 1
:
31 03 00 Part 4
PERFORMANCE PART Pre–Amp 32 00 00 Part 1
:
32 03 00 Part 4
PERFORMANCE PART ModFx/Ins 1 33 00 00 Part 1
:
33 03 00 Part 4
PERFORMANCE PART PowAmp/Ins 2 34 00 00 Part 1 (CP5 only)
:
34 03 00 Part 4
PERFORMANCE PART BACKING PART 35 00 00
PERFORMANCE PART AD PART 36 00 00 (CP5 only)
PERFORMANCE ZONE 37 00 00 Zone 1
:
37 03 00 Zone 4
DescriptionParameter
Block
Top Address Byte Count
High Mid Low Dec Hex
SYSTEM 00 00 00 40 28 Utility
00 20 00 20 14 MasterEQ
00 21 00 40 28 MasterComp
PERFORMANCE 0E mm nn 00 00 BULK HEADER
COMMON 30 00 00 24 18 Common
30 01 00 40 28 Reverb
30 02 00 24 18 Controller
30 03 00 18 12 Assignable
30 04 00 18 12 Backing
PART 31 pp 00 56 38
Part (pp = 00 – 03 (CP5), 00 – 01 (CP50): PartNo.)
32 pp 00 40 28 PreAmp (pp = 00 – 03 (CP5), 00 – 01 (CP50): PartNo.)
33 pp 00 40 28 ModFx (pp = 00 – 03 (CP5), 00 – 01 (CP50): PartNo.)
34 pp 00 40 28 PowAmp (pp = 00 – 03 (CP5): PartNo.) (CP5 only)
BACKING
PART
35 00 00 18 12 Backing Part
A/D PART 36 00 00 6 06 AD Part (CP5 only)
36 01 00 40 28 AD Insertion (CP5 only)
36 02 00 40 28 MicEffect (CP5 only)
ZONE 37 zz 00 16 10 Zone (zz = 00 – 03: ZoneNo.)
0F mm nn 00 00 BULK FOOTER
Description Bulk Header / Footer Address
High Mid Low
HEADER 0E mm nn
PERF PRESET 40 nn Performance PRE1 (nn = 0 – 27)
41 nn Performance PRE2 (nn = 0 – 27)
42 nn Performance PRE3 (nn = 0 – 27)
PERF USER 43 nn Performance USR1 (nn = 0 – 27)
44 nn Performance USR2 (nn = 0 – 27)
45 nn Performance USR3 (nn = 0 – 27)
PERF EDIT 4F nn Performance Edit Buffer (nn = 0)
MULTIPLE CONTROL 10 00 00
FOOTER 0F mm nn
PERF PRESET 40 nn Performance PRE1 (nn = 0 – 27)
41 nn Performance PRE2 (nn = 0 – 27)
42 nn Performance PRE3 (nn = 0 – 27)
PERF USER 43 nn Performance USR1 (nn = 0 – 27)
44 nn Performance USR2 (nn = 0 – 27)
45 nn Performance USR3 (nn = 0 – 27)
PERF EDIT 4F nn Performance Edit Buffer (nn = 0)
MULTIPLE CONTROL 11 00 00