Operation Manual

Setup Flowchart

This flowchart shows the procedure for setting up the CRW2100S drive. For easy

cross-referencing, the relevant pages in this manual are also given.

STEP

1-1

STEP

1-2

STEP

YES

Do you have a SCSI card?

Check that the SCSI card is

recognized correctly

(P. 22, 30)

Set up the CRW2100S drive

Install the CD writing software

Check that the CRW2100S

drive is recognized correctly

(P. 22, 30)

Purchase a SCSI card

Install the SCSI card

Recommended models:

Adaptec AHA-2940-series (PCI)

Read this manual and insert the

SCSI card into the appropriate

PCI slot on the computer.

For details about how to install the

software, refer to the documentation

that came with it.

Start using the CRW2100S

drive!

Use the drive to create audio CDs, to

back up data on your hard disk, or for

whatever purpose suits your needs.

1. Set the jumper switches

(P. 10)

2. Fit the drive into the computer

● Tower-type case

(P. 15)

As additional or replacement drive

● Desktop-type case

(P. 23)

As a replacement drive