Operation Manual

Setup Procedures
15
Fitting the CRW2100S as an Additional Drive
1 Power down your computer and unplug it from the AC outlet.
If you proceed without doing this, you run the risk of receiving an
electric shock and/or short-circuiting and damaging components,
including the CRW2100S drive.
2 Remove the outer casing of the computer. If you need to remove
screws in the process, make sure you don’t lose them.
n The method for removing the casing and fitting the drive in the drive bay can vary
depending on the manufacturer. For details, refer to the documentation that came
with your computer.