Operation Manual

Setup Procedures
28
9 Connect the 4-pin power cable to the power supply connector of the
CRW2100S drive marked “DC INPUT.”
AUDIO OU T
ID SELECT
PARITY
TERMIN ATOR
BLOCK SIZE
DC INPUT
1
+
5V G
+
12
V
RL124G
SCSI
INTERFACE
CONNECTOR
TopTop
Bottom
4-pin power cable
n There may be more than one 4-pin power cable available. Any may be used.
n These connectors are D-shaped so it is only possible to connect the power cables the
correct way round. Do not apply excessive force when making this connection.
) Tighten the four fastening screws on the side of the unit securely
using a screwdriver.