Owner's Manual

35
Place the CRW-F1DX drive horizontally.
1
Remove all additional USB devices connected to the computer,
and turn on the computer.
2
Be sure that the power switch of the CRW-F1DX drive is
turned off (STANDBY).
3
Set the 1394/USB selector of the CRW-F1DX drive to USB.
Be sure to set the 1394/USB selector while the power switch of the CRW-F1DX is
turned off (STANDBY). Interface cannot be switched if the power switch is on.
Connect with USB for Windows
Note
Note