Owner's Manual

●

Can data be read from other discs (audio CD, CD-ROM, etc.)?

If no data can be read from a specific disc, data may be written in a format that the

drive cannot recognize, or the disc itself may be damaged or deformed. Note that no

data can be read from blank discs, and the CRW-F1DX drive infrequently fail to

read data correctly from a disc even if the disc is compatible with the drive.

●

Are the extension files supporting the CRW-F1DX installed?

(For Mac OS 9.1 and 9.2)

If the extension files supporting the drive are not installed, the disc cannot be

mounted or read. The extension files come with the CD writing software.

●

Does the status LED of the CRW-F1DX drive light correctly when a disc is inserted?

When a disc is inserted, the status LED will blink blue for a moment and then light

blue. (P. 3)

If no data can be read from a specific disc, data may be written in a format that the

drive cannot recognize, or the disc may be damaged or deformed.

If the status LED does not light (stating that the drive cannot recognize the disc) no

matter what type of disc is inserted, contact the store of purchase or your nearest

Yamaha dealer (listed at the back of this manual).

9 The playback of an audio CD (CD-DA) is inaudible.

●

Check that the volume is not set to the minimum level.

●

Be sure that headphones or external speakers are properly connected to the CRW-

F1DX drive.

●

For Windows XP/Me, follow the steps if the playback audio from headphones

connected to the CRW-F1DX drive is inaudible.

If Windows Media Player 7.0 or later is used with Windows XP/Me, this problem

can happen since the digital playback option is activated by default setting.

For Windows XP

In the Device Manager dialog box (P. 33, 39), select YAMAHA CRW-F1DX

Properties and then Properties tab.

Continued on next page