User manual

Appendix
Session-at-Once (SAO)
As a writing method that combines the advantages of the above-mentioned “Disc-
at-Once” and “Track-at-Once,” you can combine multiple tracks into one session
and write them, and then add additional data.
For example, this is the writing method used to create a CD EXTRA format CD.
The audio tracks will be recorded in the first session and the data will be recorded
in the second.
Lead-in Lead-outLead-out
/Lead-in
DataAudio Audio Audio
0
Track 1 Track 2 Track 3 Track 4
Session 1 Session 2
Example: CD EXTRA
Packet Writing
This mode is used when writing to a track of a disc using small blocks of data
called “packets,” in a manner similar to a floppy disk. This mode is useful when
making small incremental backups of data. You will need to use software which
specifically supports packet writing, such as Adaptec’s DirectCD.
1 2 3 4 5 6 7 8
. . . . . . . . . . . .
Packet
Same as writing to floppy or hard disk
n Discs must be formatted before they can be used for packet writing. With CD-RW,
erased data can be overwritten until the disc is completely full.
With CD-R, the space used by the erased data cannot be reused and is “masked” so that
it is no longer visible. This can be done up to 100 times.
27