Owner`s manual

14
Fitting the CRW6416S as an Additional Drive
1 Power down your computer and unplug it from the AC outlet.
If you proceed without doing this, you run the risk of receiving an
electric shock and/or short-circuiting and damaging components
including the CRW6416S drive.
2 Remove the outer casing of the computer. If you need to remove screws in
the process, make sure you don’t lose them.
n The method for removing the casing and fitting the drive in the drive bay can vary depending
on the manufacturer. Refer to the documentation that came with your computer for further
details.
Installation
6416S_e15.qx 6/29/99 6:00 PM Page 21