Owner`s manual

Installation
7 Connect one end of the 50-pin SCSI flat cable to the computer’s SCSI adapter card.
Align the red line of the cable with Pin 1 of the card’s SCSI connector. Next,
connect a free 50-pin connector on the SCSI flat cable to the back of the
CRW6416S drive such that the red line on the cable is aligned with pin 1, marked
“SCSI INTERFACE CONNECTOR 1.” Then place the SCSI card back in its
original PCI slot and secure its mounting bracket using a screw.
SCSI adapter card
50-pin SCSI flat cable
AUDIO OUT
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
SCSI
INTERFACE
CONNECTOR
DC INPUT
1
+
5V G
+
12
V
R L 1 2 4G
SCSI
INTERFACE
CONNECTOR
1
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR 1
To Pin 1
Pin 1
Pin 1
Mark
Align red line with
Pin 1 of SCSI INTERFACE
CONNECTOR 1
17
6416S_e15.qx 6/29/99 6:00 PM Page 24