Owner`s manual

19
Installation
9 Connect a 4-pin power cable to the power supply connector of the
CRW6416S marked “DC INPUT.”
n There may be more than one 4-pin power cable available. Any may be used.
n These connectors are D-shaped so it is only possible to connect the power cables the correct
way round. Do not apply excessive force when making this connection.
) Tighten the four fastening screws on the side of the unit securely using a
screwdriver.
AUDIO OUT
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
SCSI
INTERFACE
CONNECTOR
DC INPUT
1
+
5V G
+
12
V
R L 1 2 4G
TTopopTop
Bottom
4-pin power cable
6416S_e15.qx 6/29/99 6:00 PM Page 26