Owner`s manual

8 Connect one end of the 50-pin SCSI flat cable to the computer’s SCSI adapter card.
Align the red line of the cable with Pin 1 of the card’s SCSI connector. Next,
connect a free 50-pin connector on the SCSI flat cable to the back of the
CRW6416S drive such that the red line on the cable is aligned with pin 1, marked
“SCSI INTERFACE CONNECTOR 1.” Then place the SCSI card back in its
original PCI slot and secure its mounting bracket using a screw.
50-pin SCSI flat cable
AUDIO OUT
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
SCSI
INTERFACE
CONNECTOR
DC INPUT
1
+
5V G
+
12
V
R L 1 2 4G
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR 1
Pin 1
SCSI
INTERFACE
CONNECTOR
1
To Pin 1
SCSI adapter card
Align red line
with Pin 1 of
SCSI INTERFACE
CONNECTOR 1
Mark
Pin 1
26
Installation
6416S_e15.qx 6/29/99 6:00 PM Page 33