Owner`s manual

1
Setup Flowchart
This flowchart shows the procedure for setting up the CRW6416S drive. For
easy cross-referencing, the relevant pages in this manual are also given.
STEP
1
STEP
1-1
STEP
1-2
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
YES
NO
Do you have a SCSI adapter
card?
Check that the SCSI adapter
card is installed correctly
Set up the CRW6416S drive
Install the CD writing software
Check that the CRW6416S
drive is installed correctly
Obtain a SCSI adapter card
Install the SCSI adapter card
Recommended models:
Adaptec AHA2940-series (PCI)
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.
Go to Control Panel | System | Device
Manager tab. Double-click on SCSI
controllers and check that the adapter
card has been installed correctly.
Go to Control Panel | System | Device
Manager tab. Double-click on CDROM
and check that the drive has been
installed correctly.
For details about how to install the
software, refer to the manual that comes
with it.
Start using the CRW6416S
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
1. Set the jumper switches (P.10)
2. Fit the drive into the computer
● Tower-type case (P.14)
As additional or replacement drive
● Desktop-type case (P.22)
As a replacement drive
6416S_e15.qx 6/29/99 6:00 PM Page 8