Technical information

Chapter 2 33
Main System Settings
The Main System Settings screen allows you to set the system date and time.
The following table describes the parameters in this screen.
Parameter Description Options
System Time Sets the system time
Format: HH:MM:SS (Hour: Minute: Second)
Help: <Tab>,<Shft-Tab>, or <Enter> selects field.
System Date Sets the system date.
Format: MM/DD/YYYY (Month/Day/Year)
Help: <Tab>, <Shift>, or <Enter> selects field.
Boot Display Set the display output device on boot up. When
set to Auto, the computer automatically
determines the display device. If an external
display device (e.g., monitor) is connected, it
becomes the boot display.
Auto
LCD Only
CRT Only
Screen Expansion Expand the display screen on boot up .
Enabled
Disabled
QuickBoot Mode Allow the system to skip certain tests while
booting. This will decrease the time needed to
boot the system.
Enabled
Disabled
Startup Screen Enable to show the graphic picture screen on boot
up.
Enabled
Disabled
Boot on LAN When set to enabled, system will boot on LAN.
Notice: Need to restart system for enabling Boot-
on-LAN function.
Disabled
Enabled
Hotkey Beep Enable or disable hotkey beep.
Enabled
Disabled
PhoenixBIOS Setup Utility
Information
Main
Advanced Security Boot Exit
Item Specific Help System Time:
System Date:
Boot Display
Screen Expansion
QuickBoot Mode
Startup Screen
Boot on LAN
Hotkey Beep
Auto Dim
F12 Multi-Boot
[xx:xx:xx]
[xx/xx/xxxx]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F1
Help ÏÐ Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit ÍÎ Select Menu
Enter
Select ¾ Sub-Menu
F10
Save and Exit