Technical information

48 OpenBook 1556
BIOS Flash Utility
The BIOS flash memory update is required for the following conditions:
T
New versions of system programs
T
New features or options
Executing Flash Program
1.
Create a bootable disk.
2.
Unzip the flash file, and save the three files (.bat, .exe, .wph) to the bootable disk.
3.
Follow the flashA.bat file’s commands to flash BIOS.
IMPORTANT:
Never turn off the system power while Flash BIOS is programming. This will damage your
system.
4.
After Flash BIOS is done, system will auto shut down.
NOTE:
If there are any problems occurred during BIOS update, see for troubleshooting.