Technical information

Chapter 3 69
7. Remove the tape, disconnect the coaxial cable, and then remove the coaxial cable from the LCD carefully.
Removing the Sensor Board
1. See “Removing the Battery Pack” on page 53
2. See “Removing the Middle Covers” on page 56
3. See “” on page 56
4. See “.” on page 58
5. See “Removing the LCD Bezel” on page 66
6. See “Removing the LCD” on page 68
7. Remove the two golden screws, remove the tapes and then detach the sensor board from the LCD
carefully.
.