Owner's Manual

USING USEFUL FUNCTIONS
15 En
OPERATION
English
■ Performing DAB CLEAR and INIT SCAN
DAB CLEAR: Deletes all DAB station information and preset settings stored in the unit. After DAB CLEAR is
complete, the unit moves to the INIT SCAN functions automatically. Note that once DAB CLEAR is performed, the
deleted information and preset settings cannot be restored.
INIT SCAN: Performs the initial scan manually. Each time you perform INIT SCAN, the newly received stations are
added to the previously received stations.
* After performing INIT SCAN, the unit airs the first station as stored in station.
■ Using TUNE AID
TUNE AID: Measures reception strength of the received DAB signal (from 0 (none) to 100 (best)). Adjust the DAB/
FM antenna to find the best position to receive the DAB signal.
y
To check the frequency corresponding to the channel label, refer to “DAB frequency information” on page 12.
■ Setting STATION ORDER and DRC MODE
Follow the operation procedure on page 14.
STATION ORDER: Enables you to change the station order. Set to ENSEMBLE to list the stations in ensemble order.
The default setting is ALPHANUMERIC.
DRC MODE: Changes the DRC (☞ P. 12, 14) setting. This function utilizes DRC automatically if it is
transmitted.The default setting is AUTO.
The sleep timer sets the unit to the standby mode after the specified time elapses.
The SLEEP indicator lights up on the front panel display (☞ P. 7).
Using DAB option menu
MENU
ENTER
OPTION
ENTER
Press OPTION. Select desired
option menu.
Confirm with
ENTER.
“Press ENTER”
appears. Press
ENTER to perform*.
ENTER
1 2 3 4
OPTION
Exit option
menu.
5
MENU
ENTER
OPTION
ENTER
Press OPTION. Select TUNE AID. Confirm with
ENTER.
Switch the channel label. Exit TUNE AID.
MENU
ENTER
ENTER
1 2 3 4 5
OPTION
Exit option
menu.
6
Using sleep timer
SLEEP
Press repeatedly.
30min 60min 90min 120min OFF