Owner's Manual
Listening to FM/AM broadcast
12 En y The circled numbers and alphabets correspond to the ones on the attached sheet.
1
Press
2
TUNER
(or press
N
INPUT
repeatedly until “FM”, “AM”, or “DAB” is
displayed).
2 Press
D
BAND (or
E
BAND
) repeatedly to
select “FM” or “AM”.
3 Press and hold
G
TUNING / .
This unit automatically searches and tunes into a
station.
(When you control this unit with the front panel)
Push the multi jog dial (
J
) repeatedly to select
“Auto tune”, and then rotate the multi jog dial (
J
)
to start searching.
y
• If the signal received from the station you want to select is weak,
tune into it manually. Press
G
TUNING /
repeatedly or
select “Manual tune” in step 3 above and rotate the
multi jog dial
(
J
) to tune into the desired station.
• If the signal is weak and noise occurs during FM stereo reception,
follow the procedure below to set this unit to the monaural mode.
1Press
I
FUNCTION and then press
0
ENTER (or press
K
FUNCTION and then push the
multi jog dial
(
J
))
.
2 Press
0
/
(or rotate the
multi jog dial
(
J
)) to select
“
MONO
” instead of
“
STEREO
” and then press
0
ENTER
(or
push the
multi jog dial (
J
)
).
Press and hold
6
MEMORY (or
L
PROGRAM/
MEMORY) until “Auto memory” begins to flash.
• Up to 30 FM and 20 AM stations can be preset.
• “COMPLETE” is displayed when automatic preset
tuning is finished.
Automatic preset tuning overwrites the existing preset stations.
■ Presetting favorite broadcast stations
manually
1 Tune into the station to be preset.
Refer to “Selecting broadcast stations” on this page.
2 Press
6
MEMORY (or
L
PROGRAM/
MEMORY).
« Within 4 seconds
Press
F
PRESET u / d (or rotate the multi
jog dial (
J)) to select a desired preset
number.
« Within 4 seconds
Press
6
MEMORY (or
L
PROGRAM/
MEMORY)
.
■ Deleting preset stations
Select the preset station and press
H
CLEAR (or
G
CLEAR). To delete all FM or AM preset stations, press
and hold
H
CLEAR (or
G
CLEAR).
Press
F
PRESET / repeatedly to select the
desired preset station.
(When you control this unit with the front panel)
Push the multi jog dial (
J
) repeatedly to select “Preset
tune”, and then rotate the multi jog dial (
J
) to select the
desired preset station.
y
You can also select the desired preset station using the numeric
buttons (
5
).
1 Select the preset radio station you want to
edit the name.
2 Push and hold the multi jog dial (
J
) until
the cursor flashes.
Listening to FM/AM broadcast
Selecting broadcast stations
Presetting broadcast stations
automatically
Note
Selecting preset stations
Editing the name of the preset
radio stations